RevB
About the RevB PCB
RevB is an open source PCB design by vintlabs, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 27.9 × 15.2 mm, with 10 components from 7 distinct parts.
Other key parts include the MCP9600. By type, the board carries 4 connectors, 4 resistors, 1 IC and 1 capacitor.
It belongs with the sensors designs in this gallery.
From the project
MCP9600 I²C Module (Hardware)
Simple module to detect temperature from a thermocouple on a Raspberry Pi (plugs in directly to the header on a Pi) or Arduino etc. Supports thermocouple types K, J, T, N, S, E, B and R, and uses simple I²C interface. Can be run on 2.7v to 5.5v. Board dimensions: 15x28mm (headers protrude beyond that)
There are headers on both sides of the board so that multiple boards can be connected together (being sure to use a different I2C address for each!), and there are footprints to add pullup resistors if they are required.
Main components on the RevB
RevB bill of materials (BOM)
10 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP9600 | QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm | U1 |
| 1 | Conn_01x05 | PinSocket_1x05_P2.54mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2 |
| 1 | Conn_01x03 | PinHeader_1x03_P1.00mm_Vertical | J3 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Horizontal | J4 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 4 | 10k | R_0805_2012Metric | R1, R2, R3, R4 |
RevB design files
The KiCad project lives in the vintlabs/MCP9600-Module repository on GitHub; these links point at the commit this page was built from.
- LayoutRevB.kicad_pcb
RevB: common questions
How big is the RevB PCB?
The RevB measures 27.9 × 15.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RevB?
10 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the RevB design files?
From the vintlabs/MCP9600-Module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RevB design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which vintlabs chose for the repository.
More boards in MCP9600-Module
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956