Timer board
visgence·timer_board
About the Timer board
Timer board is an open source AVR/Arduino PCB design by visgence, published on GitHub. It is a 2-layer board measuring 139.7 × 88.9 mm, with 61 components from 37 distinct parts.
Its main chip is the ATMEGA32U4, from the AVR/Arduino family. Other key parts include the DS3231MZ and 74HC04. By type, the board carries 20 resistors, 11 connectors, 10 capacitors, 6 switches, 4 diodes and 3 ICs.
Main components on the Timer board
Timer board bill of materials (BOM)
61 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U4 | TQFP44 | IC1 |
| 1 | DS3231MZ | SO8N | U1 |
| 1 | 74HC04 | SO14N | U2 |
| 2 | NPN | TO92 | Q1, Q2 |
| 1 | RESONATORSMD | RESONATOR-SMD | Y1 |
| 1 | AVR-ISP-6 | pin_array_3x2 | CON1 |
| 1 | USBMICRO | USB-MICRO-B | P1 |
| 1 | OUT_INV | bornier2 | P2 |
| 1 | Trigger | bornier2 | P3 |
| 1 | OUT | bornier2 | P4 |
| 1 | ADC | bornier2 | P5 |
| 1 | 32Khz | PINTST | P6 |
| 4 | pin | 1pin_C | p10, p11, p12, p13 |
| 1 | BATTERY | CR2032 | BT1 |
| 1 | 2X16_LCD | LCD16X2 | DS1 |
| 1 | FUSE | SM1206 | F1 |
| 1 | T9AS5D22-5 | T9AS5D22-5 | K1 |
| 1 | UP | SW_PUSH_6X6 | S1 |
| 1 | DOWN | SW_PUSH_6X6 | S2 |
| 1 | LEFT | SW_PUSH_6X6 | S3 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RIGHT | SW_PUSH_6X6 | S4 |
| 1 | SELECT | SW_PUSH_6X6 | S5 |
| 1 | RESET | SW_PUSH_6X6 | S6 |
| 1 | Relay | SM0603 | D1 |
| 1 | DIODE | D4 | D2 |
| 1 | Power | LED-0603 | D3 |
| 1 | Trigger | LED-0603 | D4 |
| 2 | CP1 | SM1206POL | C1, C8 |
| 6 | 1uF | SM0603_Capa | C2, C3, C4, C5, C6, C7 |
| 1 | C | SM0603_Capa | C9 |
| 1 | 1uF | SM0603 | C10 |
| 6 | 10k | SM0603 | R1, R2, R8, R9, R13, R19 |
| 2 | 1k | SM0603 | R3, R18 |
| 4 | 2.2k | SM0603 | R4, R12, R16, R17 |
| 5 | 5k | SM0603 | R5, R6, R7, R10, R11 |
| 2 | 22 | SM0603 | R14, R15 |
| 1 | POT | Var_resistor | RV1 |
Timer board design files
The KiCad project lives in the visgence/timer_board repository on GitHub; these links point at the commit this page was built from.
- Layouttimer_board.kicad_pcb
Timer board: common questions
What microcontroller does the Timer board use?
The Timer board is built around the ATMEGA32U4, from the AVR/Arduino family.
How big is the Timer board?
The Timer board measures 139.7 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Timer board?
61 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Timer board design files?
From the visgence/timer_board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Timer board design in my own project?
The repository has no license, so all rights stay with visgence. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Timer board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k