ChromaSense
Vivek-Neel·ChromaSense·hardware/ChromaSense_Breakout.kicad_pcb
About the ChromaSense PCB
ChromaSense is an open source PCB design by Vivek-Neel, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 25 mm, with 7 components from 6 distinct parts.
Other key parts include the TCS35303-2M and AP2112K-1.8. By type, the board carries 4 capacitors, 2 ICs and 1 connector.
It belongs with the iot & wireless, sensors and dev boards & breakouts designs in this gallery.
From the project
Wireless colorimeter: custom TCS3530 breakout PCB, ESP32 firmware with a from-scratch 24-bit sensor driver and factory calibration, live CIE 1931 dashboard in PyQt5.
A wireless colorimeter I built for my M.Eng. project: a custom PCB around the TCS3530 colour sensor, an ESP32 that reads it and does the colour-science math, and a Python GUI that plots the result live on a CIE 1931 diagram. Parts cost works out to around €62 — commercial instruments that do roughly the same job run €1,500 to €6,000+.
If you only read one section, read the three bugs. That's where most of the actual engineering happened.

Main components on the ChromaSense
ChromaSense bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCS35303-2M | SMD8_TCS3530_OSM | U1 |
| 1 | AP2112K-1.8 | SOT-23-5 | U2 |
| 1 | Grove | NS-Tech_Grove_1x04_P2mm_Vertical | J1 |
| 1 | 4.7u | C_0603_1608Metric | C1 |
| 2 | 100n | C_0603_1608Metric | C2, C3 |
| 1 | 1u | C_0603_1608Metric | C4 |
ChromaSense design files
The KiCad project lives in the Vivek-Neel/ChromaSense repository on GitHub; these links point at the commit this page was built from.
ChromaSense: common questions
How big is the ChromaSense PCB?
The ChromaSense measures 30 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ChromaSense?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ChromaSense design files?
From the Vivek-Neel/ChromaSense repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ChromaSense design in my own project?
Yes, under the terms of its MIT license, which Vivek-Neel chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k