7 open source boards using the AP2112K-1.8
Real designs built with the AP2112K-1.8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Dev real
iamdarshg
105 × 105 mm310 parts4LNo license1
FPGANorthernStudios iCE40-UltraPlus-FPGA-Dev-Board
uzzambutt
27 × 55.5 mm62 parts4LMIT1
ESP32ACPI
Snt8
60 × 50 mm37 parts2LNo license1
Rpi level shifter v1
charkster
51.3 × 20.3 mm18 parts2LMIT1
Xiao rp2040 level shifter v1
26.9 × 38.3 mm14 parts2LMIT1
Heartthingv2 ecg
kermitsgonnakermicide
25.8 × 28.7 mm30 parts2LNo license0
RP2040/RP2350Dev real production
105 × 105 mm310 parts4LNo license1
The AP2112K-1.8 in open source designs
The gallery holds 7 open source boards using the AP2112K-1.8 from 6 GitHub repositories; a typical one measures about 51.3 × 50 mm and carries around 37 components.
57% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Dev real production by iamdarshg.
Parts used alongside the AP2112K-1.8
Microcontrollers on boards using the AP2112K-1.8
What boards using the AP2112K-1.8 are built for
AP2112K-1.8: common questions
Where can I find a AP2112K-1.8 reference design?
Each of the 7 boards on this page is a real design using the AP2112K-1.8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AP2112K-1.8?
The AP2112K-1.2, AP2112K-3.3 and NVT2010PW appear in the most repositories here.
Which microcontrollers do boards using the AP2112K-1.8 use?
Most are built on RP2040/RP2350 (2), ESP32 (1) and FPGA (1).
How big is a typical board using the AP2112K-1.8?
The median is 51.3 × 50 mm, and 57% are two-layer designs.
What is the most popular open source board using the AP2112K-1.8?
By GitHub stars, Dev real production by iamdarshg, with 1 stars.
Can I simulate one of these boards using the AP2112K-1.8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.