PixArt-PAW3395-Breakout-Board
About the PixArt-PAW3395-Breakout-Board
PixArt-PAW3395-Breakout-Board is an open source PCB design by vnguyen31, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 30.2 mm, with 28 components from 15 distinct parts.
Other key parts include the paw3395 and TPS73601DBV. By type, the board carries 15 capacitors, 6 resistors, 3 ICs, 3 diodes and 1 connector.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Fully functioning Breakout Board with SPI pin headers for PAW3395 Motion Sensor
Main components on the PixArt-PAW3395-Breakout-Board
PixArt-PAW3395-Breakout-Board bill of materials (BOM)
28 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | paw3395 | PMW3360 | U1 |
| 2 | TPS73601DBV | SOT-23-5 | U2, U3 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 3 | 3.3Vbd | D_SOD-323 | D1, D2, D3 |
| 4 | 10uF | C_0805_2012Metric | C1, C5, C13, C15 |
| 7 | 100nF | C_0805_2012Metric | C2, C4, C6, C8, C10, C12, C14 |
| 1 | 4.7uF | C_0805_2012Metric | C3 |
| 1 | 33uF | C_0805_2012Metric | C7 |
| 2 | 1uF | C_0805_2012Metric | C9, C11 |
| 1 | 5.6 | R_0805_2012Metric | R1 |
| 1 | 10k | R_0805_2012Metric | R2 |
| 1 | 30.1k | R_0805_2012Metric | R3 |
| 1 | 63.4k | R_0805_2012Metric | R4 |
| 1 | 37.4k | R_0805_2012Metric | R5 |
| 1 | 52.3k | R_0805_2012Metric | R6 |
PixArt-PAW3395-Breakout-Board design files
The KiCad project lives in the vnguyen31/PixArt-PAW3395-Breakout-Board repository on GitHub; these links point at the commit this page was built from.
PixArt-PAW3395-Breakout-Board: common questions
How big is the PixArt-PAW3395-Breakout-Board?
The PixArt-PAW3395-Breakout-Board measures 30 × 30.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PixArt-PAW3395-Breakout-Board?
28 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the PixArt-PAW3395-Breakout-Board design files?
From the vnguyen31/PixArt-PAW3395-Breakout-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PixArt-PAW3395-Breakout-Board design in my own project?
Yes, under the terms of its MIT license, which vnguyen31 chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k