Xor gate toy
VolcanoKing370·xor-gate-toy
About the Xor gate toy PCB
Xor gate toy is an open source PCB design by VolcanoKing370, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 132.1 × 53.3 mm, with 27 components from 7 distinct parts.
Other key parts include the 74HC86. By type, the board carries 8 switches, 8 resistors, 4 LEDs and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
This is a simple quad XOR gate (74HC86) that is controlled by 8 key switches and outputs to 4 LEDS, all powered by a coin cell battery. This is implemented in KiCAD.
Now you might be wondering, how do I get this manufactured by OshKosh, PCBWay, JLC, etc? This is just a dollar-store 3D model!
It's surprisingly easy! First, you must go to File > Fabrication Outputs > Gerbers(.gbr)...
Now, assuming that the design passes the Design Rule Check (DRC), you should hit Plot, which should generate the Gerber files. Then click Generate Drill Files... to generate the drill files (PCB manufacturing involves drilling holes after all! Especially for through hole parts.)

Main components on the Xor gate toy
Xor gate toy bill of materials (BOM)
27 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC86 | DIP-14_W7.62mm | U1 |
| 1 | BS-7 MPD (Memory Protection Devices) | Battery_Holder_Coin_2032_BS-7 | BAT1 |
| 4 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | RLED1, RLED2, RLED3, RLED4 |
| 8 | SW_Push | SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | SW_SPDT | Switch_Slide_11.6x4mm_EG1218 | SWPWR1 |
| 4 | LED | LED_D3.0mm | LED1, LED2, LED3, LED4 |
| 8 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
Xor gate toy design files
The KiCad project lives in the VolcanoKing370/xor-gate-toy repository on GitHub; these links point at the commit this page was built from.
- Layoutxor_gate_toy.kicad_pcb
- Schematicxor_gate_toy.kicad_sch
Xor gate toy: common questions
How big is the Xor gate toy PCB?
The Xor gate toy measures 132.1 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Xor gate toy?
27 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Xor gate toy design files?
From the VolcanoKing370/xor-gate-toy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Xor gate toy design in my own project?
Yes, under the terms of its CC0-1.0 license, which VolcanoKing370 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k