CHeepCore

VollstaendigerName·CHeepCore·CHeepCore/CHeepCore.kicad_pcb

CHeepCore PCB layout, top view — open source RISC-V board by VollstaendigerName

About the CHeepCore PCB

CHeepCore is an open source RISC-V PCB design by VollstaendigerName, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 29.5 × 18.3 mm, with 15 components from 11 distinct parts.

Its main chip is the CH32V003FXUX, from the RISC-V family. Other key parts include the 3V3 LDO. By type, the board carries 5 connectors, 5 capacitors, 2 ICs, 2 resistors and 1 crystal.

It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.

From the project

CHeepCore is a minimalist, ultra-low-cost RISC-V development board built around the CH32V003F4U6 microcontroller. It exposes 16 GPIOs on breadboard-compatible headers, features USB-C power with selectable 3.3 V/5 V rails, and supports SWD/JTAG programming, all for under 0.50€.

A minimalist, ultra-low-cost RISC-V development board based on the CH32V003 series. Designed for embedded hobbyists, students, and low-cost prototyping.

- Name: CHeepCore - Revision: 0.0.1b - Date: 2025-08-06 - KiCad Version: 9.0.3 - Target Audience: Embedded hobbyists, students, low-cost prototyping - Cost Goal: Complete microcontroller board for under 0.50€

CHeepCore, from the project README
From the project README

Main components on the CHeepCore

CHeepCore bill of materials (BOM)

15 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH32V003FXUX
CH32V003FxUx
U101
1
3V3 LDO
U301
1
CRYSTAL_GND24
Crystal_GND24
Y101
2
CONN_01X10
Conn_01x10
J101, J102
1
USB
J103
1
CONN_01X03
Conn_01x03
J201
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J301
1
100NF
100nF
C101
2
22PF
22pF
C102, C103
2
1µF
C301, C302
2
5K1
5k1
R301, R302

CHeepCore design files

The KiCad project lives in the VollstaendigerName/CHeepCore repository on GitHub; these links point at the commit this page was built from.

CHeepCore: common questions

What microcontroller does the CHeepCore use?

The CHeepCore is built around the CH32V003FXUX, from the RISC-V family.

How big is the CHeepCore PCB?

The CHeepCore measures 29.5 × 18.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CHeepCore?

15 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CHeepCore design files?

From the VollstaendigerName/CHeepCore repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CHeepCore design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the CHeepCore without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

Similar boards