Esp32seismo
vpatoka·esp32seismo·hardware/carrier/seismo-carrier.net
About the Esp32seismo PCB
Esp32seismo is an open source PCB design by vpatoka, published on GitHub. It is a board, with 63 components from 44 distinct parts.
Other key parts include the OKI-78SR-5/1.5-W36-C and LP2950ACZ-3.3. By type, the board carries 22 resistors, 13 connectors, 11 capacitors, 6 test points, 3 diodes and 2 ICs.
It belongs with the science & space and rf & radio designs in this gallery.
From the project
ESP32-based Seismographer
The carrier for esp32seismo. Three modules plug into female headers on it:
- the ESP32-C5-DevKitC-1 - the MikroE ADC 15 Click - a ZS-042 DS3231 module
Everything else is on the carrier: the DC to 5 V converter fed from the EQAMP's J8, a separate quiet 3.3 V for the ADC, one analog front-end block per amplifier channel, the 8.192 MHz ADC clock, and the GPS PPS input.
Main components on the Esp32seismo
Esp32seismo bill of materials (BOM)
63 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OKI-78SR-5/1.5-W36-C | Converter_DCDC_Murata_OKI-78SR_Vertical | U1 |
| 1 | LP2950ACZ-3.3 | TO-92_Inline | U2 |
| 1 | CB3LV-3I-8M192000 | Oscillator_CTS_CB3LV_7.0x5.0mm | Y1 |
| 1 | DevKit J1 | PinSocket_1x16_P2.54mm_Vertical | J1 |
| 1 | DS3231 ZS-042 | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | DevKit J3 | PinSocket_1x16_P2.54mm_Vertical | J3 |
| 1 | Click mikroBUS 1-8 | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Click mikroBUS 16-9 | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | DC IN EQAMP J8 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | P1 |
| 1 | CH1 Z IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | P2 |
| 1 | CH2 H IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | P3 |
| 1 | TO CLICK TB1 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | P4 |
| 1 | TO CLICK TB2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | P5 |
| 1 | CLKIN | PinHeader_1x02_P2.54mm_Vertical | P6 |
| 1 | GPS | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | P7 |
| 1 | SPARE | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | P8 |
| 1 | RXEF050 | C_Disc_D7.5mm_W5.0mm_P5.00mm | F1 |
| 1 | CLK SEL | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | REF SEL | PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | +VIN | PinHeader_1x01_P2.54mm_Vertical | TP1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | +5V | PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | +3V3 | PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | +3V3A | PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | GND | PinHeader_1x01_P2.54mm_Vertical | TP5 |
| 1 | CLKIN | PinHeader_1x01_P2.54mm_Vertical | TP6 |
| 1 | green | LED_D3.0mm | LED1 |
| 1 | P6KE33A | D_DO-15_P10.16mm_Horizontal | D1 |
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | ferrite bead | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | FB1 |
| 1 | 22uF 50V | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 100uF 25V | CP_Radial_D6.3mm_P2.50mm | C2 |
| 5 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C6, C7, C12, C13 |
| 2 | 10uF 16V | CP_Radial_D5.0mm_P2.00mm | C4, C5 |
| 2 | 47nF C0G | C_Disc_D5.0mm_W2.5mm_P5.00mm | C10, C11 |
| 2 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R43 |
| 6 | 33R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11, R12, R14, R32, R33 |
| 3 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13, R15, R16 |
| 2 | 9.1k 0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R22 |
| 2 | 1.0k 0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R23 |
| 2 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30, R34 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R31, R44 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R40, R41 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R42 |
Esp32seismo design files
The KiCad project lives in the vpatoka/esp32seismo repository on GitHub; these links point at the commit this page was built from.
Esp32seismo: common questions
How many components are on the Esp32seismo?
63 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32seismo design files?
From the vpatoka/esp32seismo repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.
Can I use the Esp32seismo design in my own project?
The repository has no license, so all rights stay with vpatoka. Use it as a reference, and ask the author before reusing the design.
Similar boards
Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568