CopyPad

vracton·CopyPad·pcb/CopyPad.kicad_pcb

CopyPad PCB layout, top view — open source RP2040/RP2350 board by vracton

About the CopyPad PCB

CopyPad is an open source RP2040/RP2350 PCB design by vracton, published on GitHub. It is a 2-layer board measuring 61.2 × 65.6 mm, with 9 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 3 diodes, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Keyboard for copying

A custom macropad designed for efficient copy, cut, and paste with an integrated OLED display and rotary encoder for volume control.

You may find a youtube showcase here: https://www.youtube.com/shorts/x1sgPPhZi9E.

- 3-Key Linear Layout: Keys for Cut (Ctrl+X), Copy (Ctrl+C), and Paste (Ctrl+V) - OLED Display: 128x32 pixel display showing current status - Rotary Encoder: Volume control with tactile feedback - Open Source: Complete hardware and software design files included

CopyPad, from the project README
From the project README

Main components on the CopyPad

CopyPad bill of materials (BOM)

9 components, 5 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
OLED_128x32
J1
3
SW_Push
SW1, SW2, SW3
1
RotaryEncoder_Switch
SW4
3
SK6812MINI
D1, D2, D3

CopyPad design files

The KiCad project lives in the vracton/CopyPad repository on GitHub; these links point at the commit this page was built from.

CopyPad: common questions

What microcontroller does the CopyPad use?

The CopyPad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the CopyPad PCB?

The CopyPad measures 61.2 × 65.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CopyPad?

9 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the CopyPad design files?

From the vracton/CopyPad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CopyPad design in my own project?

The repository has no license, so all rights stay with vracton. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CopyPad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards