ROBO-RACE-BOT
VritoX098·ROBO-RACE-BOT·PCB/L298 Module.kicad_pcb
About the ROBO-RACE-BOT PCB
ROBO-RACE-BOT is an open source PCB design by VritoX098, published on GitHub. It is a 2-layer board measuring 53.3 × 45.7 mm, with 18 components from 9 distinct parts.
Other key parts include the L7805. By type, the board carries 9 diodes, 4 capacitors, 2 modules, 1 IC, 1 inductor and 1 resistor.
It belongs with the robotics & motion, sensors and iot & wireless designs in this gallery.
From the project
A fully customizable 4-wheel drive robot controlled via bluetooh using an ESP-32 and L298N motor driver.
A fully customizable 4-wheel drive robot controlled via bluetooh using an ESP-32 and L298N motor driver.
This project is a 4WD robot built aroubd the ESP32 microcontroller. It uses an L298N motor driver to control four TT/BO gear motors, powered by a 3S 18650 li-ion battery pack. The robot can be controlled wirelessly via bluetooh using any phone or computer with a serial terminal app.

Main components on the ROBO-RACE-BOT
ROBO-RACE-BOT bill of materials (BOM)
18 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Horizontal_TabDown | U1 |
| 1 | MOTOR1 IN | PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | MOTOR2 IN | PinHeader_1x03_P2.54mm_Vertical | M2 |
| 1 | LED | LED_D3.0mm | D1 |
| 8 | 1N4007 | D_A-405_P7.62mm_Horizontal | D2, D3, D4, D5, D6, D7, D8, D9 |
| 1 | L298HN | TO-220-15_P2.54x2.54mm_StaggerOdd_Lead4.58mm_Vertical | L298 |
| 2 | 47u | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 100n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C3, C4 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
ROBO-RACE-BOT design files
The KiCad project lives in the VritoX098/ROBO-RACE-BOT repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/L298 Module.kicad_pcb
- SchematicPCB/L298 Module.kicad_sch
ROBO-RACE-BOT: common questions
How big is the ROBO-RACE-BOT PCB?
The ROBO-RACE-BOT measures 53.3 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ROBO-RACE-BOT?
18 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the ROBO-RACE-BOT design files?
From the VritoX098/ROBO-RACE-BOT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ROBO-RACE-BOT design in my own project?
The repository has no license, so all rights stay with VritoX098. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k