HardLabs

SyncBoard

wakimizufu·TBSEQ·TBSEQ_Board_V2/SyncBoard/SyncBoard.kicad_pcb

SyncBoard PCB layout, top view — open source RP2040/RP2350 board by wakimizufu

About the SyncBoard PCB

SyncBoard is an open source RP2040/RP2350 PCB design by wakimizufu, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 12 components from 7 distinct parts.

Its main chip is the Raspberry Pi Pico DIP-40_W17.76mm, from the RP2040/RP2350 family. Other key parts include the TC74VHC541F. By type, the board carries 6 connectors, 3 ICs, 2 capacitors and 1 switch.

Main components on the SyncBoard

TC74VHC541F

SyncBoard bill of materials (BOM)

12 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TC74VHC541F
IC1, IC2
1
~
U1
2
AudioJack3_SwitchTR
J1, J2
2
CONN_01X02_PIN
Conn_01x06
J3, J4
2
Conn_01x06
J5, J6
1
SS12D00G3
S1
2
0.1uf
C1, C2

SyncBoard design files

The KiCad project lives in the wakimizufu/TBSEQ repository on GitHub; these links point at the commit this page was built from.

SyncBoard: common questions

What microcontroller does the SyncBoard use?

The SyncBoard is built around the Raspberry Pi Pico DIP-40_W17.76mm, from the RP2040/RP2350 family.

How big is the SyncBoard PCB?

The SyncBoard measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SyncBoard?

12 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SyncBoard design files?

From the wakimizufu/TBSEQ repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SyncBoard design in my own project?

The repository has no license, so all rights stay with wakimizufu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SyncBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in TBSEQ

Similar boards