BareTag Anchor
About the BareTag Anchor PCB
BareTag Anchor is an open source PCB design by WaltTeb, published on GitHub. It is a 2-layer board measuring 59.3 × 24.5 mm, with 35 components from 23 distinct parts.
Other key parts include the Voltage Regulator, ` and LYR998. By type, the board carries 8 resistors, 7 connectors, 7 capacitors, 3 ICs, 3 diodes and 2 transistors.
It belongs with the power & battery and usb & debug tools designs in this gallery.
From the project
PDR draft of SDP final report
Item locating and theft prevention system built around the DWM3001C using Ultra Wideband, BLE, and LoRa technologies.
Qorvo DWM3001C - UWB & BLE SoC using nRF52833 and Qorvo DWM3000
CP2102 Serial Converter - LoRa to Serial
Raspberry Pi 4B - Host for Lora processing
Tag-Connect Edge-Connect Programmer - Programming Tag PCBs
SEGGER JLink Edu Mini - Programming Anchor PCBs
Main components on the BareTag Anchor
BareTag Anchor bill of materials (BOM)
35 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Voltage Regulator | volt_reg | U1 |
| 1 | ` | DWM3001C | U2 |
| 1 | LYR998 | PinHeader_1x05_P2.54mm_Vertical | U3 |
| 2 | IRLML2402TRPBF Infineon Technologies | SOT-23-3 | Q1, Q2 |
| 5 | TSM-102-01-X-SV | SAMTEC_TSM-102-01-X-SV | J1, J4, J5, J7, J8 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | S2B-PH-SM4-TB(LF)(SN) S2B-PH-SM4-TB_LF__SN_ JST Sales America Inc. | JST_S2B-PH-SM4-TB | J3 |
| 2 | Murata BLM15EG121SN1D | BEADC1005X55N | B1, B2 |
| 1 | TL3315NF160Q E-Switch | SW_TL3315NF160Q | S1 |
| 2 | TestPoint | TestPoint_Keystone_5015_Micro-Minature | TP2, TP3 |
| 1 | LTST-C235KGKRKT | LED_APHBM2012LSURKSYKC | D1 |
| 2 | LED | WL-SMCW_0603 | D2, D3 |
| 1 | C | CAPC1005X55N | C1 |
| 1 | 2.2uF | CAPC1005X55N | C2 |
| 2 | 10uF | CAPC1005X70N | C3, C4 |
| 1 | .1uF | CAPC1005X55N | C5 |
| 1 | 47pF | CAPC1005X55N | C6 |
| 1 | 100nF | C_0201_0603Metric | C8 |
| 2 | 1K5 | RESC1005X35N | R1, R3 |
| 2 | 100K | RESC1005X40 | R2, R4 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 150K | RESC1005X40N | R5 |
| 1 | 820K | RESC1005X40N | R6 |
| 2 | 1k8 | RESC1005X40N | R7, R8 |
BareTag Anchor design files
The KiCad project lives in the WaltTeb/BareTag_Tool_Tracker repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/anchor/anchor.kicad_pcb
- SchematicPCB/anchor/anchor.kicad_sch
BareTag Anchor: common questions
How big is the BareTag Anchor PCB?
The BareTag Anchor measures 59.3 × 24.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BareTag Anchor?
35 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the BareTag Anchor design files?
From the WaltTeb/BareTag_Tool_Tracker repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BareTag Anchor design in my own project?
The repository has no license, so all rights stay with WaltTeb. Use it as a reference, and ask the author before reusing the design.
More boards in BareTag_Tool_Tracker
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k