2022 generic
waterloo-rocketry·electrical_tutorials·2022_generic/2022_generic.kicad_pcb
About the 2022 generic PCB
2022 generic is an open source PIC PCB design by waterloo-rocketry, published on GitHub. It is a 2-layer board measuring 50.8 × 43.2 mm, with 15 components from 13 distinct parts.
Its main chip is the PIC16LF15313, from the PIC family. By type, the board carries 4 resistors, 2 connectors, 2 test points, 2 diodes, 1 IC and 1 buzzer.
From the project
Hardware & software used in electrical tutorials
Contents: pictemplate.X: contains an empty MPLAB X project for use with the picdev board (see schematics in canhw). The project is set up with all the necessary files to get CAN communication up and running. 2019PICCANdevboard: contains the reference schematics used in the 2019 electrical Kicad tutorials. 2020keychainPIC: contains the desing files for the 2020 KiCAD tutorials.
Main components on the 2022 generic
2022 generic bill of materials (BOM)
15 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16LF15313 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | Programming Connector | PinHeader_5x2.54_SMD_90deg_952-3198-1-ND | J2 |
| 1 | PKM13EPYH4000-A0 | C_Radial_D12.5mm_H25.0mm_P5.00mm | BZ1 |
| 1 | PTV09A-4015U-B103 | Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 1 | 6mm tactile button | SW_PUSH_6mm | SW1 |
| 2 | TestPoint | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2 |
| 1 | RED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | GREEN | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 160R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
2022 generic design files
The KiCad project lives in the waterloo-rocketry/electrical_tutorials repository on GitHub; these links point at the commit this page was built from.
2022 generic: common questions
What microcontroller does the 2022 generic use?
The 2022 generic is built around the PIC16LF15313, from the PIC family.
How big is the 2022 generic PCB?
The 2022 generic measures 50.8 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2022 generic?
15 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2022 generic design files?
From the waterloo-rocketry/electrical_tutorials repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2022 generic design in my own project?
The repository has no license, so all rights stay with waterloo-rocketry. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2022 generic without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in electrical_tutorials
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379