2026 STM32
waterloo-rocketry·electrical_tutorials·2026_STM32/2026_STM32.kicad_pcb
About the 2026 STM32 PCB
2026 STM32 is an open source STM32 PCB design by waterloo-rocketry, published on GitHub. It is a 2-layer board measuring 50 × 40 mm, with 31 components from 21 distinct parts.
Its main chip is the STM32C011F4P6, from the STM32 family. Other key parts include the SPX3819M5-L-3-3, CH340N and TMP1075DSG. By type, the board carries 11 resistors, 5 capacitors, 4 ICs, 3 test points, 3 diodes and 2 connectors.
From the project
Hardware & software used in electrical tutorials
Contents: pictemplate.X: contains an empty MPLAB X project for use with the picdev board (see schematics in canhw). The project is set up with all the necessary files to get CAN communication up and running. 2019PICCANdevboard: contains the reference schematics used in the 2019 electrical Kicad tutorials. 2020keychainPIC: contains the desing files for the 2020 KiCAD tutorials.
Main components on the 2026 STM32
2026 STM32 bill of materials (BOM)
31 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPX3819M5-L-3-3 | SOT-23-5 | U1 |
| 1 | STM32C011F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | CH340N | JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TMP1075DSG | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U5 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | 0.5A | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | TC33X-2-203E | PTV09A4015UB103 | RV1 |
| 1 | 1825910-6 | SW_PUSH_6mm | SW1 |
| 1 | POT | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | SCL | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 1 | SDA | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP3 |
| 1 | RED | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | GREEN | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | BLUE | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 2 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 3 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5 |
| 4 | 10kR | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1, R5, R6, R7 |
| 3 | 330R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R10, R11 |
| 2 | 100R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R3, R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1kR | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R8, R9 |
2026 STM32 design files
The KiCad project lives in the waterloo-rocketry/electrical_tutorials repository on GitHub; these links point at the commit this page was built from.
2026 STM32: common questions
What microcontroller does the 2026 STM32 use?
The 2026 STM32 is built around the STM32C011F4P6, from the STM32 family.
How big is the 2026 STM32 PCB?
The 2026 STM32 measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2026 STM32?
31 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2026 STM32 design files?
From the waterloo-rocketry/electrical_tutorials repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2026 STM32 design in my own project?
The repository has no license, so all rights stay with waterloo-rocketry. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2026 STM32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in electrical_tutorials
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k