Fanuc gripper

wesfletch·fanuc-gripper·pcb/gripper_pcb.kicad_pcb

Fanuc gripper PCB layout, top view — open source RP2040/RP2350 board by wesfletch

About the Fanuc gripper PCB

Fanuc gripper is an open source RP2040/RP2350 PCB design by wesfletch, published on GitHub. It is a 2-layer board measuring 66.2 × 66.5 mm, with 42 components from 31 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the NSi83086E and LMR51635YDDCR. By type, the board carries 8 resistors, 7 capacitors, 5 connectors, 3 test points, 3 diodes and 2 ICs.

It belongs with the robotics & motion designs in this gallery.

From the project

End effector for the FANUC CR-7iA/L cobot arm. Mechanical, electrical, and software.

Software, electrical and mechanical design for an open-hardware end-effector for mounting on a FANUC CR-7iA/L cobot.

Main components on the Fanuc gripper

Fanuc gripper bill of materials (BOM)

42 components, 31 distinct parts.

QtyPartRefs
1
NSi83086E
U1
1
LMR51635YDDCR
U3
1
RaspberryPi_Pico
A1
1
BOARD
J1
1
SERVO
J2
1
DBG
J3
1
COMM_DBG
J4
1
SWITCH
J6
1
SMBJ30A
CR1
1
TPD1E10B06DYAR
CR2
3
1uF
Cin4, Cin5, Cin6
1
100nF
CinX2
3
47uF
Cout1, Cout2, Cout3
1
Fuse
F1
2
Jumper_2_Open
JP1, JP2
3
TestPoint
TP5, TP6, TP7
2
SM712_SOT23
D1, D2
1
CCS15S30_L3F
D3
1
8.2uH
L2
1
100nF
C2
Show 11 more
QtyPartRefs
1
100uF
C3
1
220uF
C4
1
1uF
C5
2
0.1uF
C6, C7
1
10uF
C8
2
120Ω
R1, R2
2
10k
R3, R4
1
100k
R7
1
19.1k
R8
1
2.2k
R9
1
150
R10

Fanuc gripper design files

The KiCad project lives in the wesfletch/fanuc-gripper repository on GitHub; these links point at the commit this page was built from.

Fanuc gripper: common questions

What microcontroller does the Fanuc gripper use?

The Fanuc gripper is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Fanuc gripper PCB?

The Fanuc gripper measures 66.2 × 66.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fanuc gripper?

42 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fanuc gripper design files?

From the wesfletch/fanuc-gripper repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fanuc gripper design in my own project?

The repository has no license, so all rights stay with wesfletch. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fanuc gripper without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards