ATMega Board

WestianPKl·pcb-docs·ATMega_Board/ATMega_Board.kicad_pcb

ATMega Board layout, top view — open source AVR/Arduino board by WestianPKl

About the ATMega Board

ATMega Board is an open source AVR/Arduino PCB design by WestianPKl, published on GitHub. It is a 2-layer board measuring 71.7 × 50.2 mm, with 24 components from 16 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. By type, the board carries 8 capacitors, 5 resistors, 4 connectors, 2 diodes, 1 IC and 1 transistor.

It belongs with the power & battery designs in this gallery.

From the project

A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI, or UART.

A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI, or UART.

Author: Piotr Kłyś Tool: KiCAD 8.x Firmware: MicroPython (Pico boards), AVR-GCC (ATmega boards)

The central development and integration board built around the Raspberry Pi Pico. Used to test all peripheral modules in the collection.

Main components on the ATMega Board

ATMega Board bill of materials (BOM)

24 components, 16 distinct parts.

QtyPartRefs
1
ATmega328P-P
U2
1
BC847
Q1
1
16MHz
Y1
1
Conn_02x10_Odd_Even
J1
1
AVR-ISP-10
J2
2
Conn_01x10_Pin
J3, J4
1
Tact Switch 6x6mm / 13mm
SW1
1
LED_SCK
D1
1
LED_PWR
D3
1
600 Ω@100 MHz
L1
4
100nF
C1, C2, C4, C7
2
1uF
C3, C5
2
22pF
C6, C8
2
10kR
R1, R3
2
1K
R2, R4
1
100kR
R5

ATMega Board design files

The KiCad project lives in the WestianPKl/pcb-docs repository on GitHub; these links point at the commit this page was built from.

ATMega Board: common questions

What microcontroller does the ATMega Board use?

The ATMega Board is built around the ATmega328P-P, from the AVR/Arduino family.

How big is the ATMega Board?

The ATMega Board measures 71.7 × 50.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ATMega Board?

24 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the ATMega Board design files?

From the WestianPKl/pcb-docs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ATMega Board design in my own project?

The repository has no license, so all rights stay with WestianPKl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ATMega Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in pcb-docs

Similar boards