Frontpanel

westlicht·performer-hardware

Frontpanel PCB layout, top view — open source board by westlicht

About the Frontpanel PCB

Frontpanel is an open source PCB design by westlicht, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 172.5 × 128.3 mm, with 91 components from 9 distinct parts.

By type, the board carries 32 LEDs, 29 switches, 26 connectors and 3 jumpers.

It belongs with the audio designs in this gallery.

From the project

PER|FORMER Eurorack Sequencer - Hardware Design Files

This repository contains the hardware design files (KiCad) for the PER|FORMER eurorack sequencer.

For more information on the project go here.

The firmware is hosted in a separate repository here.

The width of the module is 34 HP in eurorack standard.

The BOM is available as a CSV and HTML. In addition to the parts on the PCB there are a few additional hardware components that are necessary to complete the build, see here.

Frontpanel, from the project README
From the project README

Frontpanel bill of materials (BOM)

91 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
PJ301CM
J601, J602
24
PJ301BM
J603, J604, J605, J606, J607, J608, J609, J610 +16
1
ALPS-STEC12E08
ENC101
1
USB_A
JP101
1
NHD-3.12-25664UC
JP102
1
PJS008U-3000
JP103
5
TL1105T
SW301, SW302, SW303, SW304, SW305
24
TL1105T
SW317, SW318, SW319, SW320, SW321, SW322, SW323, SW324 +16
32
WP115VEGW
LED401, LED402, LED403, LED404, LED405, LED406, LED407, LED408 +24

Frontpanel design files

The KiCad project lives in the westlicht/performer-hardware repository on GitHub; these links point at the commit this page was built from.

Frontpanel: common questions

How big is the Frontpanel PCB?

The Frontpanel measures 172.5 × 128.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Frontpanel?

91 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Frontpanel design files?

From the westlicht/performer-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Frontpanel design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in performer-hardware

Similar boards