Purdue-FPGA-Club
weyer7·Purdue-FPGA-Club·ECE270-board3/board1.kicad_pcb
About the Purdue-FPGA-Club PCB
Purdue-FPGA-Club is an open source PCB design by weyer7, published on GitHub. It is a 2-layer board measuring 99.1 × 124.5 mm, with 98 components from 18 distinct parts.
Other key parts include the 74HC14. By type, the board carries 24 resistors, 20 switches, 16 LEDs, 16 capacitors, 9 connectors and 4 ICs.
It belongs with the audio designs in this gallery.
From the project
Promoting student-led design, verification, and implementation of user-defined hardware.
Main components on the Purdue-FPGA-Club
Purdue-FPGA-Club bill of materials (BOM)
98 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 74HC14 | SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3, U4 |
| 4 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical_SMD | J1, J2, J3, J4 |
| 1 | Conn_02x10_Odd_Even | Samtec_HLE-110-02-xxx-DV_2x10_P2.54mm_Horizontal | J5 |
| 1 | Conn_02x12_Odd_Even | Samtec_HLE-112-02-xxx-DV_2x12_P2.54mm_Horizontal | J6 |
| 1 | Conn_01x02_Female | PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left | J7 |
| 1 | Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Vertical_SMD | J8 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical_SMD | J10 |
| 8 | tdsr1060 | DIP-10_W7.62mm | SS0, SS1, SS2, SS3, SS4, SS5, SS6, SS7 |
| 20 | SW_Push | SW_SPST_B3FS-4052P | SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 +12 |
| 16 | LED_ALT | LED_D3.0mm | LF0, LF1, LF2, LF3, LF4, LF5, LF6, LF7 +8 |
| 1 | LED_RCBG | LED_D5.0mm-4_RGB | D1 |
| 6 | 1uF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6 |
| 6 | .1uF | R_Array_Convex_4x0612 | C7, C8, C9, C10, C11, C12 |
| 4 | .1uF | C_0603_1608Metric | C31, C32, C33, C34 |
| 2 | 200 | R_0805_2012Metric | R75, R76 |
| 1 | 240 | R_0805_2012Metric | R78 |
| 15 | 1.5K | SOIC-16_3.9x9.9mm_P1.27mm | RN1, RN2, RN3, RN10, RN11, RN12, RN13, RN14 +7 |
| 6 | 100K | SOIC-16_3.9x9.9mm_P1.27mm | RN4, RN5, RN6, RN7, RN8, RN9 |
Purdue-FPGA-Club design files
The KiCad project lives in the weyer7/Purdue-FPGA-Club repository on GitHub; these links point at the commit this page was built from.
Purdue-FPGA-Club: common questions
How big is the Purdue-FPGA-Club PCB?
The Purdue-FPGA-Club measures 99.1 × 124.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Purdue-FPGA-Club?
98 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Purdue-FPGA-Club design files?
From the weyer7/Purdue-FPGA-Club repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Purdue-FPGA-Club design in my own project?
The repository has no license, so all rights stay with weyer7. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687