Cnc mill pcb tester
About the Cnc mill pcb tester
Cnc mill pcb tester is an open source PCB design by Wierdwizard2587, published on GitHub. It is a 2-layer board measuring 47 × 25.4 mm, with 7 components from 6 distinct parts.
Other key parts include the LM339. By type, the board carries 3 resistors, 2 ICs, 1 connector and 1 diode.
It belongs with the audio, robotics & motion and displays & leds designs in this gallery.
From the project
This is the repository for the Research and Development, Production, and assembly of the Electric Guitar MK1.
- DIY portable electric guitar with integrated digital effects and modular power/audio system - Final version features Teensy 4.0, onboard FX, rotary encoder UI, OLED display, amp/speaker output, battery or DC power, and RGB lighting - Entire build: woodwork, PCBs, 3D prints, firmware, and more - Early prototype (Mk0) failed due to poor electrical design and overcomplex hardware, rebuilt from scratch over 12+ months with newly acquired engineering and fabrication skills
Main components on the Cnc mill pcb tester
Cnc mill pcb tester bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM339 | SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | LED_RGAB | LED_D5.0mm-4_RGB | D1 |
| 1 | RED | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | GREEN | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | B | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Cnc mill pcb tester design files
The KiCad project lives in the Wierdwizard2587/ElectricGuitarMK1 repository on GitHub; these links point at the commit this page was built from.
- LayoutResearch and Development/Tool Testing/cnc mill pcb tester/cnc mill pcb tester.kicad_pcb
- SchematicResearch and Development/Tool Testing/cnc mill pcb tester/cnc mill pcb tester.kicad_sch
- BOMResearch and Development/Interface Section/AFPI/AFPI Final Release Manufacturing Files/PCB Manuafacturing and Assembly/AFPI Device V1.1 BOM.csv
Cnc mill pcb tester: common questions
How big is the Cnc mill pcb tester?
The Cnc mill pcb tester measures 47 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cnc mill pcb tester?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cnc mill pcb tester design files?
From the Wierdwizard2587/ElectricGuitarMK1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cnc mill pcb tester design in my own project?
The repository has no license, so all rights stay with Wierdwizard2587. Use it as a reference, and ask the author before reusing the design.
More boards in ElectricGuitarMK1
BMS
179 × 44 mm64 parts2LNo license1
AVR/ArduinoBMS MK2 attempt 1-using-Tp4506
226.6 × 64 mm42 parts2LNo license1
ProCo Rat
67.7 × 52.1 mm38 parts2LNo license1
AVR/Arduino4s2p 18650 Mount, BMS with Power Distribution Circuit
165.7 × 94.8 mm36 parts2LNo license1
NXPAFPI Device V1.1
85 × 45 mm28 parts2LNo license1
AVR/ArduinoBms test circuit
94.5 × 58.4 mm27 parts2LNo license1
RGB LED Mounting Board
84 × 15 mm16 parts2LNo license1
Big muff portion
31 × 37 mm11 parts2LNo license1
atopile
AxxAxx
willem-pennings
Ottercast