MACROPAD
williamta2024-dev·Marcopad·Kicad PCB/MACROPAD PCB/MACROPAD PCB.kicad_pcb
About the MACROPAD PCB
MACROPAD is an open source RP2040/RP2350 PCB design by williamta2024-dev, published on GitHub. It is a 2-layer board measuring 85.7 × 109.5 mm, with 33 components from 3 distinct parts.
Its main chip is the RP2040-ZERO, from the RP2040/RP2350 family. By type, the board carries 16 switches, 16 diodes and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
A custom-built, programmable 16-key mechanical macropad powered by the RP2040 ZERO. This project combines custom PCB design, 3D mechanical modeling, and embedded programming to create a versatile productivity tool.
A custom-built, programmable 16-key mechanical macropad powered by the RP2040 ZERO. This project combines custom PCB design, 3D mechanical modeling, and embedded programming to create a versatile productivity tool.
4x4 Matrix Layout: 16 fully programmable mechanical switches for shortcuts, macros, or media controls. RP2040 ZERO: High-performance microcontroller with native USB support. Custom PCB: Optimized layout for a compact footprint and reliable signal integrity. 3D Printed Enclosure: A custom-designed case tailored specifically for the hardware assembly. Customizable Firmware:** Easily…
Main components on the MACROPAD
MACROPAD bill of materials (BOM)
33 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040-ZERO | MODULE_RP2040-ZERO | U1 |
| 16 | SW_Push | SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 16 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
MACROPAD design files
The KiCad project lives in the williamta2024-dev/Marcopad repository on GitHub; these links point at the commit this page was built from.
MACROPAD: common questions
What microcontroller does the MACROPAD use?
The MACROPAD is built around the RP2040-ZERO, from the RP2040/RP2350 family.
How big is the MACROPAD PCB?
The MACROPAD measures 85.7 × 109.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MACROPAD?
33 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the MACROPAD design files?
From the williamta2024-dev/Marcopad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MACROPAD design in my own project?
The repository has no license, so all rights stay with williamta2024-dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MACROPAD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in Marcopad
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k