PCB for Macropad
williamta2024-dev·Marcopad·Kicad PCB/MACROPAD PCB/PCB for Macropad.kicad_pcb
About the PCB for Macropad
PCB for Macropad is an open source ESP32 PCB design by williamta2024-dev, published on GitHub. It is a 2-layer board measuring 51.9 × 83.9 mm, with 33 components from 3 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. By type, the board carries 16 switches, 16 diodes and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
A custom-built, programmable 16-key mechanical macropad powered by the RP2040 ZERO. This project combines custom PCB design, 3D mechanical modeling, and embedded programming to create a versatile productivity tool.
A custom-built, programmable 16-key mechanical macropad powered by the RP2040 ZERO. This project combines custom PCB design, 3D mechanical modeling, and embedded programming to create a versatile productivity tool.
4x4 Matrix Layout: 16 fully programmable mechanical switches for shortcuts, macros, or media controls. RP2040 ZERO: High-performance microcontroller with native USB support. Custom PCB: Optimized layout for a compact footprint and reliable signal integrity. 3D Printed Enclosure: A custom-designed case tailored specifically for the hardware assembly. Customizable Firmware:** Easily…
Main components on the PCB for Macropad
PCB for Macropad bill of materials (BOM)
33 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U1 |
| 16 | SW_Push | SW_Cherry_MX_1.00u_Plate | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 16 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
PCB for Macropad design files
The KiCad project lives in the williamta2024-dev/Marcopad repository on GitHub; these links point at the commit this page was built from.
PCB for Macropad: common questions
What microcontroller does the PCB for Macropad use?
The PCB for Macropad is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the PCB for Macropad?
The PCB for Macropad measures 51.9 × 83.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB for Macropad?
33 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB for Macropad design files?
From the williamta2024-dev/Marcopad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PCB for Macropad design in my own project?
The repository has no license, so all rights stay with williamta2024-dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB for Macropad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Marcopad
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k