Repeat hw
WojtaCZ·repeat-hw
About the Repeat hw PCB
Repeat hw is an open source Nordic nRF PCB design by WojtaCZ, published on GitHub. It is a 6-layer board measuring 50 × 50 mm, with 156 components from 68 distinct parts.
Its main chip is the nRF5340-QKxx, from the Nordic nRF family. Other key parts include the USBLC6-2SC6, W5100S, TLV431DBZ, VO618A and SI3402. By type, the board carries 84 capacitors, 29 resistors, 14 inductors, 12 ICs, 7 diodes and 4 connectors.
From the project
A repository containing hardware files (KiCad project) for the REPEAT board
Main components on the Repeat hw
Repeat hw bill of materials (BOM)
156 components, 68 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nRF5340-QKxx | Nordic_AQFN-94-1EP_7x7mm_P0.4mm | U1 |
| 3 | USBLC6-2SC6 | SOT-23-6 | U2, U10, U11 |
| 1 | W5100S | QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U3 |
| 1 | TLV431DBZ | SOT-23 | U4 |
| 2 | VO618A | SO-4_7.6x3.6mm_P2.54mm | U5, U8 |
| 1 | SI3402 | Skyworks_QFN-20_1EP5x5mm_P0.8mm_EP2.7x2.7mm | U6 |
| 1 | nRF21540 | QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_ThermalVias | U7 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U9 |
| 1 | MX25R3235FZNxx0 | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U12 |
| 1 | 32MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | ARJM11C7-114-BA-EW2 | ARJM11C7-114-BA-EW2 | J2 |
| 1 | ANT2 | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3 |
| 1 | Programming header | SOIC_clipProgSmall | J4 |
| 1 | SWRA117D | Texas_SWRA117D_2.4GHz_Right | AE1 |
| 1 | FA2805 | Transformer_Coilcraft_Si3402 | T1 |
| 2 | MM8130-2600 | MM8130-2600 | TP1, TP2 |
| 2 | BAV99 | SOT-23 | D1, D4 |
| 2 | PMEG3010EJ | D_SOD-323F | D2, D3 |
Show 48 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N4148W | D_SOD-123 | D5 |
| 1 | DFLT30A | D_PowerDI-123 | D6 |
| 1 | PMEG045T100EPD | Nexperia_CFP15_SOT-1289 | D7 |
| 2 | TBD | C_0402_1005Metric | FB1, FB2 |
| 4 | 330R | L_0805_2012Metric | FB4, FB5, FB6, FB7 |
| 2 | 10u | L_0603_1608Metric | L1, L3 |
| 1 | 2n2 | C_0402_1005Metric | L2 |
| 1 | 1u | C_0603_1608Metric | L4 |
| 2 | 3n | C_0402_1005Metric | L5, L6 |
| 2 | 1n9 | C_0402_1005Metric | L7, L8 |
| 4 | 4u7 | C_0603_1608Metric | C1, C3, C46, C47 |
| 33 | 100n | C_0402_1005Metric | C2, C7, C8, C10, C15, C16, C17, C18 +25 |
| 4 | 10p | C_0402_1005Metric | C4, C9, C24, C25 |
| 1 | DNP | C_0402_1005Metric | C5 |
| 10 | 1u | C_0603_1608Metric | C6, C12, C14, C32, C33, C35, C59, C70 +2 |
| 1 | 2n2 | C_0402_1005Metric | C11 |
| 1 | 0p7 | C_0402_1005Metric | C13 |
| 1 | 220u | CP_Elec_5x5.3 | C26 |
| 1 | 100u | C_1206_3216Metric | C27 |
| 3 | 1n 3kV | C_1206_3216Metric | C28, C29, C61 |
| 1 | 10n | C_0402_1005Metric | C30 |
| 4 | 10u | C_0603_1608Metric | C31, C52, C57, C58 |
| 1 | 15n | C_0402_1005Metric | C34 |
| 8 | 1n | C_0402_1005Metric | C44, C45, C48, C49, C50, C51, C54, C55 |
| 3 | 1p | C_0402_1005Metric | C62, C63, C68 |
| 2 | 2p | C_0402_1005Metric | C64, C65 |
| 1 | 10u | C_0402_1005Metric | C67 |
| 1 | 470p | C_0402_1005Metric | C69 |
| 4 | TBD | C_0402_1005Metric | C77, C78, C79, C80 |
| 1 | 2R2 | R_0402_1005Metric | R1 |
| 1 | 10k | R_0402_1005Metric | R2 |
| 2 | 100k | R_0402_1005Metric | R3, R8 |
| 2 | 180k | R_0402_1005Metric | R4, R21 |
| 2 | 5k1 | R_0402_1005Metric | R5, R6 |
| 1 | 1M | R_0402_1005Metric | R7 |
| 1 | 36k5 1% | R_0402_1005Metric | R9 |
| 1 | 12k1 1% | R_0402_1005Metric | R10 |
| 1 | 2k2 | R_0402_1005Metric | R11 |
| 1 | 300R 1% | R_0402_1005Metric | R12 |
| 1 | 12k 1% | R_0402_1005Metric | R13 |
| 1 | 4k99 1% | R_0402_1005Metric | R14 |
| 1 | 24k3 1% | R_0402_1005Metric | R15 |
| 1 | 75R 1% | R_0402_1005Metric | R16 |
| 4 | 3R3 | R_0402_1005Metric | R17, R18, R19, R20 |
| 4 | 49R9 | R_0402_1005Metric | R22, R23, R24, R29 |
| 2 | 330R | R_0402_1005Metric | R25, R26 |
| 1 | 10R | R_0402_1005Metric | R27 |
| 1 | R | R_0402_1005Metric | R28 |
Repeat hw design files
The KiCad project lives in the WojtaCZ/repeat-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutrepeat-hw.kicad_pcb
- Schematicrepeat-hw.kicad_sch
Repeat hw: common questions
What microcontroller does the Repeat hw use?
The Repeat hw is built around the nRF5340-QKxx, from the Nordic nRF family.
How big is the Repeat hw PCB?
The Repeat hw measures 50 × 50 mm, has 6 copper layers and is 1.5584 mm thick.
How many components are on the Repeat hw?
156 components, from 68 distinct parts. The full bill of materials is listed on this page.
Where can I download the Repeat hw design files?
From the WojtaCZ/repeat-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Repeat hw design in my own project?
The repository has no license, so all rights stay with WojtaCZ. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Repeat hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381