Rp2040-minimal template
wrochira·rp2040-minimal-template
About the Rp2040-minimal template PCB
Rp2040-minimal template is an open source RP2040/RP2350 PCB design by wrochira, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 21.3 × 30 mm, with 28 components from 13 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and NCP1117-3.3_SOT223. By type, the board carries 16 capacitors, 6 resistors, 3 ICs, 1 crystal, 1 connector and 1 switch.
From the project
A minimal, production-ready RP2040 core circuit for copy-paste reuse in custom boards.
This project implements a compact, proven RP2040 core with just the essentials: USB‑C, 3.3V regulation, flash, crystal, and a boot button. It is intended as a template, not a feature-rich dev board – you drop this core into your KiCad designs and build your own application circuitry around it, avoiding the need to re‑solve RP2040 power, USB, and clocking each time.

Main components on the Rp2040-minimal template
Rp2040-minimal template bill of materials (BOM)
28 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | RP2040-QFN-56 | U1 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C393939 USB_C_Receptacle | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | C318884 USB_BOOT | SW_SPST_TL3342 | SW1 |
| 10 | 100N 100n | C_0402_1005Metric | C1, C2, C4, C6, C7, C8, C9, C10 +2 |
| 2 | 1u | C_0402_1005Metric | C3, C5 |
| 2 | 15P 15p | C_0402_1005Metric | C12, C13 |
| 2 | 10U 10u | C_0402_1005Metric | C14, C16 |
| 2 | 27 | R_0805_2012Metric | R1, R2 |
| 2 | 1k | R_0402_1005Metric | R3, R4 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R5, R6 |
Rp2040-minimal template design files
The KiCad project lives in the wrochira/rp2040-minimal-template repository on GitHub; these links point at the commit this page was built from.
Rp2040-minimal template: common questions
What microcontroller does the Rp2040-minimal template use?
The Rp2040-minimal template is built around the RP2040, from the RP2040/RP2350 family.
How big is the Rp2040-minimal template PCB?
The Rp2040-minimal template measures 21.3 × 30 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rp2040-minimal template?
28 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rp2040-minimal template design files?
From the wrochira/rp2040-minimal-template repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rp2040-minimal template design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Rp2040-minimal template without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k