Actuator

wselsbe·optacon·actuator/actuator.kicad_pcb

Actuator PCB layout, top view — open source board by wselsbe

About the Actuator PCB

Actuator is an open source PCB design by wselsbe, published on GitHub. It is a 2-layer board measuring 31.7 × 90.2 mm, with 36 components from 17 distinct parts.

Other key parts include the HV509 and DRV2665. By type, the board carries 15 test points, 8 capacitors, 5 resistors, 3 ICs, 2 connectors and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

This project aims to recreate the Optacon (OPtical to TActile CONverter), a reading aid for the blind. The user moves a small camera module over a document to scan one letter at a time. The main module has a "tactile display": a 6x24 array of vibrating pins, so the user can feel

This project aims to recreate the Optacon (OPtical to TActile CONverter), a reading aid for the blind. The user moves a small camera module over a document to scan one letter at a time. The main module has a "tactile display": a 6x24 array of vibrating pins, so the user can feel the shape of the letter being scanned with their fingertip.

The vibrating pins are actuated by piezoelectric bimorphs, similar to those used in refreshable braille displays. The Optacon uses vibrating pins instead of static, and achieves a higher pin density: 1mm x 2mm versus 2.5mm x 2.5mm. The following videos show…

Actuator, from the project README
From the project README

Main components on the Actuator

HV509DRV2665

Actuator bill of materials (BOM)

36 components, 17 distinct parts.

QtyPartRefs
2
HV509
U1, U2
1
DRV2665
U3
1
Conn_01x12
J1
1
Conn_01x40_Socket
J2
2
VDD
TP1, TP15
1
TestPoint
TP2
12
TestPoint
TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 +4
1
Conn_01x22
piezo1
1
D
D1
1
3.3 µH
L1
3
1 µF
C1, C6, C7
3
0.1 µF
C2, C3, C8
1
0.1 µF 150V+
C4
1
10 µF
C5
1
549k
R1
2
6.98k
R2, R3
2
3.3k
R4, R5

Actuator design files

The KiCad project lives in the wselsbe/optacon repository on GitHub; these links point at the commit this page was built from.

Actuator: common questions

How big is the Actuator PCB?

The Actuator measures 31.7 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Actuator?

36 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Actuator design files?

From the wselsbe/optacon repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Actuator design in my own project?

The repository has no license, so all rights stay with wselsbe. Use it as a reference, and ask the author before reusing the design.

More boards in optacon

Similar boards