Connector
wselsbe·optacon·connector/connector.kicad_pcb
About the Connector PCB
Connector is an open source PCB design by wselsbe, published on GitHub. It is a 2-layer board measuring 22.7 × 33.2 mm, with 3 components from 2 distinct parts.
It belongs with the displays & leds designs in this gallery.
From the project
This project aims to recreate the Optacon (OPtical to TActile CONverter), a reading aid for the blind. The user moves a small camera module over a document to scan one letter at a time. The main module has a "tactile display": a 6x24 array of vibrating pins, so the user can feel
This project aims to recreate the Optacon (OPtical to TActile CONverter), a reading aid for the blind. The user moves a small camera module over a document to scan one letter at a time. The main module has a "tactile display": a 6x24 array of vibrating pins, so the user can feel the shape of the letter being scanned with their fingertip.
The vibrating pins are actuated by piezoelectric bimorphs, similar to those used in refreshable braille displays. The Optacon uses vibrating pins instead of static, and achieves a higher pin density: 1mm x 2mm versus 2.5mm x 2.5mm. The following videos show…

Connector bill of materials (BOM)
3 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x12_MountingPin | Hirose_FH34SRJ-12S-0.5SH | J1, J2 |
| 1 | Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J3 |
Connector design files
The KiCad project lives in the wselsbe/optacon repository on GitHub; these links point at the commit this page was built from.
- Layoutconnector/connector.kicad_pcb
- Schematicconnector/connector.kicad_sch
Connector: common questions
How big is the Connector PCB?
The Connector measures 22.7 × 33.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Connector?
3 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the Connector design files?
From the wselsbe/optacon repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Connector design in my own project?
The repository has no license, so all rights stay with wselsbe. Use it as a reference, and ask the author before reusing the design.
More boards in optacon
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k