Motherboard
wselsbe·optacon·motherboard/motherboard.kicad_pcb
About the Motherboard PCB
Motherboard is an open source ESP32 PCB design by wselsbe, published on GitHub. It is a 2-layer board measuring 42.9 × 71.7 mm, with 28 components from 17 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the SRV05-4 and M3406-ADJ. By type, the board carries 7 connectors, 6 jumpers, 5 resistors, 4 capacitors, 3 ICs and 2 switches.
It belongs with the displays & leds designs in this gallery.
From the project
This project aims to recreate the Optacon (OPtical to TActile CONverter), a reading aid for the blind. The user moves a small camera module over a document to scan one letter at a time. The main module has a "tactile display": a 6x24 array of vibrating pins, so the user can feel
This project aims to recreate the Optacon (OPtical to TActile CONverter), a reading aid for the blind. The user moves a small camera module over a document to scan one letter at a time. The main module has a "tactile display": a 6x24 array of vibrating pins, so the user can feel the shape of the letter being scanned with their fingertip.
The vibrating pins are actuated by piezoelectric bimorphs, similar to those used in refreshable braille displays. The Optacon uses vibrating pins instead of static, and achieves a higher pin density: 1mm x 2mm versus 2.5mm x 2.5mm. The following videos show…

Main components on the Motherboard
Motherboard bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SRV05-4 | SOT-23-6 | U1 |
| 1 | M3406-ADJ | SOT-23-5 | U2 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 6 | Conn_01x12_MountingPin | Jushuo_AFC11-S12I | J1, J2, J3, J4, J5, J6 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J7 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 5 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6 |
| 1 | RESET | SW_SPST_PTS810 | SW1 |
| 1 | BOOT | SW_SPST_PTS810 | SW2 |
| 1 | 3.3µH | TDK_VLS_3012 | L1 |
| 2 | C | C_0603_1608Metric | C1, C4 |
| 1 | 4.7µF | C_0603_1608Metric | C2 |
| 1 | 10µF | C_0603_1608Metric | C3 |
| 2 | 5.1K | R_0603_1608Metric | R1, R2 |
| 1 | 31.6k | R_0603_1608Metric | R3 |
| 1 | 6.98k | R_0603_1608Metric | R4 |
| 1 | R | R_0603_1608Metric | R5 |
Motherboard design files
The KiCad project lives in the wselsbe/optacon repository on GitHub; these links point at the commit this page was built from.
Motherboard: common questions
What microcontroller does the Motherboard use?
The Motherboard is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Motherboard PCB?
The Motherboard measures 42.9 × 71.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motherboard?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motherboard design files?
From the wselsbe/optacon repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Motherboard design in my own project?
The repository has no license, so all rights stay with wselsbe. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Motherboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in optacon
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k