V1.1.8

XeroxUAV·Zerox-FC

V1.1.8 PCB layout, top view — open source STM32 board by XeroxUAV

About the V1.1.8 PCB

V1.1.8 is an open source STM32 PCB design by XeroxUAV, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 75 components from 40 distinct parts.

Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the USBLC6-2SC6, TPS62933, TLV740P, ICM_42688 and HMC5883L-PLCC16. By type, the board carries 26 capacitors, 22 resistors, 11 ICs, 6 connectors, 6 diodes and 2 switches.

It belongs with the robotics & motion designs in this gallery.

From the project

Zerox-FC flight controller, designed by MeMa

Main components on the V1.1.8

V1.1.8 bill of materials (BOM)

75 components, 40 distinct parts.

QtyPartRefs
1
USBLC6-2SC6
U1
1
STM32F405RGT6
ST
U2
1
TPS62933
U3
2
TLV740P
TEXAS INSTRUMENT
U4, U5
1
ICM_42688
U6
1
HMC5883L-PLCC16
U7
1
MS5611-01BA
U8
2
NC7SVU04P5X
U9, U10
1
FM25CL64B-GTR
U11
1
8MHz
Y1
1
SWD
J1
1
USB_C_Receptacle_USB2.0_16P
G-Switch
J2
1
Micro_SD_Card_Det1
J6
1
ESC
J7
1
UART-SBUS
J8
1
UART-I2C
J10
2
SW_Push
SW1, SW2
1
LED (GREEN)
D1
2
D_Schottky
D2, D3
1
LED (RED)
D5
Show 20 more
QtyPartRefs
1
LED (BLUE)
D6
1
LED (YELLOW)
D7
1
1.5uH (R013)
L1
14
1uF
C1, C2, C3, C6, C15, C16, C17, C18 +6
2
20pF
C4, C5
2
2.2uF
C7, C8
2
100nF
C9, C12
1
10uF (50V)
C10
1
100nF (50V)
C11
2
22uF
C13, C14
1
220nF
C22
1
4.7uF
C23
2
5.1k 1%
R1, R2
10
10k
R5, R7, R9, R10, R11, R21, R22, R23 +2
5
1k
R8, R12, R18, R19, R20
1
10R
R13
1
51k 1%
R14
1
9.1k
R15
1
1.3k 1%
R16
1
10k 1%
R17

V1.1.8 design files

The KiCad project lives in the XeroxUAV/Zerox-FC repository on GitHub; these links point at the commit this page was built from.

V1.1.8: common questions

What microcontroller does the V1.1.8 use?

The V1.1.8 is built around the STM32F405RGT6, from the STM32 family.

How big is the V1.1.8 PCB?

The V1.1.8 measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V1.1.8?

75 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the V1.1.8 design files?

From the XeroxUAV/Zerox-FC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the V1.1.8 design in my own project?

The repository has no license, so all rights stay with XeroxUAV. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the V1.1.8 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Zerox-FC

Similar boards