38 open source boards using the MS5611-01BA
Real designs built with the MS5611-01BA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Main Board
Terrapin-Rocket-Team
71 × 66 mm87 parts4LNo license17STM32
CanardBoard
waterloo-rocketry
100 × 70 mm244 parts6LGPL-3.015RP2040/RP2350
Pilot Oriented Navigation System
MasaoC
55.4 × 77.6 mm120 parts4LMIT15ESP32
Hw sensor
larus-breeze
120 × 74.6 mm215 parts4LCustom license14FPGA
IO-SDR
rishivg
99.4 × 60 mm309 parts8LCERN-OHL-S-2.010STM32
Alturia
rckTom
45 × 24 mm96 parts4LCC-BY-NC-4.07STM32
Harpia FC
gabs911
86 × 56.7 mm62 parts2LNo license5RoboCape
PREDICT-EPFL
86.4 × 54.6 mm113 partsNo license4ESP32
UWB Fly Drone
DynamicWhiteHat
40 × 61 mm75 parts2LNo license4FPGA
IO SDR 1.1
SunnyYoshimitsu
91.5 × 91.5 mm268 parts6LNo license3STM32
350 Flight controller
ThaoMinhHoang
98.7 × 104 mm233 parts4LNo license3STM32
Flight computer
cuspaceflight
80 × 80 mm114 parts4LNo license2STM32
NoNameComputer-2.0
PlanAndBuild
40 × 100 mm107 parts4LNo license2ALTIMET02
mlab-modules
40.1 × 19.8 mm11 parts2LGPL-3.02Raspberry Pi
DronPi
radioelf
71.8 × 50.9 mm135 parts2LNo license1STM32
IRIS
codinga593
80 × 80 mm129 parts6LNo license1STM32
Forte
codinga593
50 × 60 mm60 parts4LNo license1Boardoza MS5611 Barometric Pressure Sensor Breakout Board
Boardoza
20 × 20 mm16 parts2LCC-BY-SA-4.01AVR/Arduino
DATALOGGER02
mlab-modules
101.1 × 60.5 mm153 parts2LGPL-3.00STM32
HUMA-Rocket-Flight-Computer
manyetox
51.9 × 113.8 mm150 parts6LNo license0RP2040/RP2350
Version2
rice-eclipse
50.8 × 87 mm130 parts4LNo license0STM32
Steam pigeon locator hardware
fschroer
54 × 25 mm98 parts4LNo license0STM32
Fjalar flight controller
aesirkth
35.1 × 77 mm84 parts4LNo license0STM32
Alacer-1
tomatencode
50 × 40 mm79 parts4LNo license0STM32
V1.1.3
XeroxUAV
37.5 × 37.5 mm78 parts2LNo license0Project Prometheus
nguyjo
50 × 100 mm73 parts4LNo license0STM32
National robotics challenge submission
advaitconty
100 × 100 mm72 parts4LNo license0NXP
Flight-Computer
Tim-Drake0
82 × 38 mm61 parts2LNo license0ESP32
Esp32c3
souptik-samanta
40.8 × 20 mm47 parts4LNo license0STM32
PX4FMUv2.4
lachlanA
70 × 40.5 mm351 partsGPL-2.0429STM32
High power module
Terrapin-Rocket-Team
38 × 43.6 mm83 parts4LNo license17STM32
NewSkyF7-Air
kuku-199
36 × 36 mm145 parts4LApache-2.010STM32
V1.1.8
XeroxUAV
40 × 40 mm75 parts2LNo license0ARCH
Terrapin-Rocket-Team
65 × 30 mm64 parts4LNo license17ESP32
MIDAS Mini MK1
ISSUIUC
25 × 80 mm122 parts4LNo license31RP2040/RP2350
ProPico
SunnyYoshimitsu
40 × 40 mm57 parts2LNo license3
How designs wire the MS5611-01BA
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the MS5611-01BA connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 27 of 32 designs, most often 100 nF (then 10 µF).
- The SDI/SDA pin has a pull-up to 3.3V on 16 of 31 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCLK pin has a pull-up to 3.3V on 16 of 31 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 91% |
|
| PSpin 2 | Connected to: GND 44% · 3.3V 38% · a signal 19% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| SDI/SDApin 7 | Connected to: The microcontroller 68% |
|
| SCLKpin 8 | Connected to: The microcontroller 68% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PX4FMUv2.4 by lachlanA, MIDAS Mini MK1 by ISSUIUC, ARCH by Terrapin-Rocket-Team and Pilot Oriented Navigation System by MasaoC.
The MS5611-01BA in open source designs
The gallery holds 38 open source boards using the MS5611-01BA from 32 GitHub repositories; a typical one measures about 51.3 × 58.3 mm and carries around 92 components.
67% use four copper layers or more, and 21% carry an open source license.
The most starred is PX4FMUv2.4 by lachlanA.
Parts used alongside the MS5611-01BA
Microcontrollers on boards using the MS5611-01BA
What boards using the MS5611-01BA are built for
MS5611-01BA: common questions
Where can I find a MS5611-01BA reference design?
Each of the 38 boards on this page is a real design using the MS5611-01BA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MS5611-01BA VDD pin?
The VDD pin has a decoupling capacitor on 27 of 32 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 32 open source designs using the MS5611-01BA.
What pull-up resistor is used on the MS5611-01BA SDI/SDA pin?
The SDI/SDA pin has a pull-up to 3.3V on 16 of 31 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 32 open source designs using the MS5611-01BA.
What pull-up resistor is used on the MS5611-01BA SCLK pin?
The SCLK pin has a pull-up to 3.3V on 16 of 31 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 32 open source designs using the MS5611-01BA.
What parts are used alongside the MS5611-01BA?
The USBLC6-2SC6, BNO085, STM32F405RGTx, AMS1117-3.3 and BMI088 appear in the most repositories here.
Which microcontrollers do boards using the MS5611-01BA use?
Most are built on STM32 (19), ESP32 (4), RP2040/RP2350 (3) and FPGA (2).
How big is a typical board using the MS5611-01BA?
The median is 51.3 × 58.3 mm, and 33% are two-layer designs.
What is the most popular open source board using the MS5611-01BA?
By GitHub stars, PX4FMUv2.4 by lachlanA, with 429 stars.
Can I simulate one of these boards using the MS5611-01BA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.