ThermalCamera
XFactHD·ThermalCamera·Hardware/ThermalCamera.kicad_pcb
About the ThermalCamera PCB
ThermalCamera is an open source Microchip SAM PCB design by XFactHD, published on GitHub under the LGPL-3.0 license. It is a 2-layer board measuring 76.2 × 55.9 mm, with 40 components from 24 distinct parts.
Its main chip is the SAMD51J, from the Microchip SAM family. Other key parts include the NHD-2.8-240320AF-CSXP-F, MCP73831-2-OT, AP2112K-3.3 and BD49K34G. By type, the board carries 13 capacitors, 12 resistors, 5 ICs, 5 connectors, 2 switches and 2 diodes.
From the project
Simple MLX90640 based thermal camera
Main components on the ThermalCamera
ThermalCamera bill of materials (BOM)
40 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAMD51J | TQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | NHD-2.8-240320AF-CSXP-F | NHD-2.8-240320AF-CSXP-F | U2 |
| 1 | MCP73831-2-OT | SOT-23-5 | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | BD49K34G | SOT-23 | U5 |
| 1 | 32.768k | Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J1 |
| 1 | DM3AT-SF-PEJM5 | HRS_DM3AT-SF-PEJM5 | J2 |
| 1 | MLX | JST_SH_SM04B-SRSS-TB_04x1.00mm_Angled | J3 |
| 1 | USB4110-GF-A | GCT_USB4110-GF-A | J4 |
| 1 | BAT | JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J5 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | SW_Push | SW_SPST_B3U-3000P | SW2 |
| 2 | LED | LED_0805 | D1, D2 |
| 2 | 8p | C_0805 | C1, C2 |
| 8 | 100n | C_0805 | C3, C4, C5, C6, C7, C8, C9, C13 |
| 1 | 1u | C_0805 | C10 |
| 2 | 10u | C_0805 | C11, C12 |
| 6 | 10k | R_0805 | R1, R2, R4, R6, R9, R10 |
| 1 | R | R_0805 | R3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 680 | R_0805 | R5 |
| 1 | 1k | R_0805 | R7 |
| 1 | 20k | R_0805 | R8 |
| 2 | 5.1k | R_0805 | R11, R12 |
ThermalCamera design files
The KiCad project lives in the XFactHD/ThermalCamera repository on GitHub; these links point at the commit this page was built from.
ThermalCamera: common questions
What microcontroller does the ThermalCamera use?
The ThermalCamera is built around the SAMD51J, from the Microchip SAM family.
How big is the ThermalCamera PCB?
The ThermalCamera measures 76.2 × 55.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ThermalCamera?
40 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the ThermalCamera design files?
From the XFactHD/ThermalCamera repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ThermalCamera design in my own project?
Yes, under the terms of its LGPL-3.0 license, which XFactHD chose for the repository.
Can I test firmware for the ThermalCamera without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416