Cam rp2040

Xiloscient·cam_rp2040·cam_pcb/cam_pcb.kicad_pcb

Cam rp2040 PCB layout, top view — open source RP2040/RP2350 board by Xiloscient

About the Cam rp2040 PCB

Cam rp2040 is an open source RP2040/RP2350 PCB design by Xiloscient, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 40 mm, with 32 components from 17 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and NCP1117-3.3_SOT223. By type, the board carries 18 capacitors, 7 resistors, 3 ICs, 2 connectors, 1 crystal and 1 switch.

From the project

Embedded platform to run basic ml models

Cam rp2040, from the project README
From the project README

Main components on the Cam rp2040

Cam rp2040 bill of materials (BOM)

32 components, 17 distinct parts.

QtyPartRefs
1
W25Q128JVS
U1
1
RP2040
U2
1
NCP1117-3.3_SOT223
U3
1
12Mhz
X1
1
TYPE-C-31-M-12
J1
1
Conn_01x24
J2
1
TS-1187A-B-A-B
S1
2
33pf
C1, C2
10
100n
C3, C4, C6, C7, C9, C10, C12, C13 +2
2
1u
C5, C8
3
10u
C11, C17, C18
1
100n
C16
1
1K
R1
1
10k
R3
2
27
R4, R5
1
1M
R6
2
5.1K
R7, R8

Cam rp2040 design files

The KiCad project lives in the Xiloscient/cam_rp2040 repository on GitHub; these links point at the commit this page was built from.

Cam rp2040: common questions

What microcontroller does the Cam rp2040 use?

The Cam rp2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Cam rp2040 PCB?

The Cam rp2040 measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cam rp2040?

32 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cam rp2040 design files?

From the Xiloscient/cam_rp2040 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Cam rp2040 design in my own project?

Yes, under the terms of its MIT license, which Xiloscient chose for the repository.

Can I test firmware for the Cam rp2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards