Hexapod
xKMx1·Hexapod·PCB/new_PCB/new_PCB/.history/new_PCB.kicad_pcb
About the Hexapod PCB
Hexapod is an open source ESP32 PCB design by xKMx1, published on GitHub. It is a 2-layer board measuring 99 × 95 mm, with 54 components from 19 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N16R8V, from the ESP32 family. Other key parts include the 74LVC125A1 and 74LVC14A1. By type, the board carries 22 capacitors, 15 resistors, 9 connectors, 4 ICs, 2 transistors and 2 diodes.
From the project
KiCad Local History Directory =============================
KiCad Local History Directory =============================
This directory contains automatic snapshots of your project files. KiCad periodically saves copies of your work here, allowing you to recover from accidental changes or data loss.
You can browse and restore previous versions through KiCad's File > Local History menu.
To disable this feature: Preferences > Common > Project Backup > Enable automatic backups
Main components on the Hexapod
Hexapod bill of materials (BOM)
54 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC-1-N16R8V | ESP32-S3-DEVKITC-1-N16R8V | U1 |
| 1 | ~ | MP1584EN | U2 |
| 1 | 74LVC125A1 | SOT108-1 | U3 |
| 1 | 74LVC14A1 | SOT108-1 | U4 |
| 2 | SUD50P04-08 | TO-252-2 | Q1, Q2 |
| 2 | XT60PW-F | AMASS-XT60PW-F | J1, J2 |
| 6 | MOLEX-Connector | CONN_22035035_MOL | J3, J4, J5, J6, J7, J8 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 2 | BZV55B15 | D_MiniMELF | D1, D2 |
| 11 | 100nF | C_0805_2012Metric | C1, C3, C4, C5, C10, C11, C13, C14 +3 |
| 1 | 100uF | CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 22uF | CP_Radial_D6.3mm_P2.50mm | C6 |
| 7 | 220uF | CP_Radial_D6.3mm_P2.50mm | C7, C8, C9, C12, C15, C17, C21 |
| 2 | 10uF | C_0805_2012Metric | C19, C20 |
| 10 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R10, R11 +2 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 2 | 22R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15 |
Hexapod design files
The KiCad project lives in the xKMx1/Hexapod repository on GitHub; these links point at the commit this page was built from.
Hexapod: common questions
What microcontroller does the Hexapod use?
The Hexapod is built around the ESP32-S3-DEVKITC-1-N16R8V, from the ESP32 family.
How big is the Hexapod PCB?
The Hexapod measures 99 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hexapod?
54 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hexapod design files?
From the xKMx1/Hexapod repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hexapod design in my own project?
The repository has no license, so all rights stay with xKMx1. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hexapod without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k