4 open source boards using the ESP32-S3-DEVKITC-1-N16R8V
Real designs built with the ESP32-S3-DEVKITC-1-N16R8V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Hexapod
xKMx1
99 × 95 mm54 parts2LNo license1ESP32
Unflying-Fish
DinosaurPotato534
114.9 × 89.5 mm41 parts2LNo license0ESP32
Audio signal generator
igor-gia
90.5 × 68 mm26 parts2LMIT0- schematic only · 25 partsESP32
ArScanner
GustavoGuseMartins
25 partsNo license0
The ESP32-S3-DEVKITC-1-N16R8V in open source designs
The gallery holds 4 open source boards using the ESP32-S3-DEVKITC-1-N16R8V from 4 GitHub repositories; a typical one measures about 99 × 89.5 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Hexapod by xKMx1.
Microcontrollers on boards using the ESP32-S3-DEVKITC-1-N16R8V
What boards using the ESP32-S3-DEVKITC-1-N16R8V are built for
ESP32-S3-DEVKITC-1-N16R8V: common questions
Where can I find a ESP32-S3-DEVKITC-1-N16R8V reference design?
Each of the 4 boards on this page is a real design using the ESP32-S3-DEVKITC-1-N16R8V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-S3-DEVKITC-1-N16R8V use?
Most are built on ESP32 (4).
How big is a typical board using the ESP32-S3-DEVKITC-1-N16R8V?
The median is 99 × 89.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-S3-DEVKITC-1-N16R8V?
By GitHub stars, Hexapod by xKMx1, with 1 stars.
Can I simulate one of these boards using the ESP32-S3-DEVKITC-1-N16R8V before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.