Hw module xesc
xtech·hw-module-xesc
About the Hw module xesc
Hw module xesc is an open source PCB design by xtech, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 35 × 100.5 mm, with 47 components from 27 distinct parts.
Other key parts include the xESC2, 2.54mm 2x2 socket, LV2862XDDC, 2.54mm 1x6 socket and 2.54mm 1x9 socket. By type, the board carries 18 capacitors, 9 ICs, 8 diodes, 6 resistors, 5 connectors and 1 inductor.
It belongs with the robotics & motion designs in this gallery.
From the project
Carrier to use xESC standalone
A breakout/carrier module for the xESC2 mini brushless motor controller, designed for stand-alone use outside of a larger mainboard.
The xESC2 mini is a small, low-cost FOC motor controller for BLDC motors (10 A / 40 V continuous). It ships as a bare module with pin headers — it expects 5 V logic from a host board.
This carrier PCB makes the xESC2 mini usable stand-alone by adding:

Main components on the Hw module xesc
Hw module xesc bill of materials (BOM)
47 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | xESC2 | xESC2-mini | U8 |
| 3 | 2.54mm 2x2 socket | Dummy | U18, U21, U24 |
| 1 | LV2862XDDC | SOT-23-6 | U28 |
| 2 | 2.54mm 1x6 socket | Dummy | U30, U33 |
| 1 | 2.54mm 1x9 socket | Dummy | U36 |
| 1 | 2.54mm 1x5 socket | Dummy | U39 |
| 1 | Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J18 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J22 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J36 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J39 |
| 1 | Conn_01x02 | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J42 |
| 1 | SMBJ40CA | D_SMB | D1 |
| 1 | SS14 | D_SMA | D4 |
| 3 | DNP | D_SMB | D8, D9, D10 |
| 1 | VS-2EFH02HM3/I | D_SMF | D22 |
| 2 | LED GREEN | LED_0805_2012Metric | D31, D36 |
| 1 | 47uH | L_Sunlord_SWPA5040S | L5 |
| 11 | 10uF@50V | C_1206_3216Metric | C1, C51, C54, C61, C66, C67, C85, C88 +3 |
| 2 | 22uF/6.3V | C_0603_1608Metric | C2, C21 |
| 2 | 100nF@50V | C_0402_1005Metric | C3, C10 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 220uF@80V | CP_Radial_D10.0mm_P5.00mm | C64, C65 |
| 1 | 22pF/50V | C_0603_1608Metric | C76 |
| 1 | 100k | R_0402_1005Metric | R9 |
| 1 | 120k | R_0603_1608Metric | R10 |
| 1 | 22k | R_0603_1608Metric | R17 |
| 1 | 150R | R_0603_1608Metric | R43 |
| 2 | 1k | R_0805_2012Metric | R45, R64 |
Hw module xesc design files
The KiCad project lives in the xtech/hw-module-xesc repository on GitHub; these links point at the commit this page was built from.
- Layouthw-module-xesc.kicad_pcb
- Schematichw-module-xesc.kicad_sch
Hw module xesc: common questions
How big is the Hw module xesc?
The Hw module xesc measures 35 × 100.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Hw module xesc?
47 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hw module xesc design files?
From the xtech/hw-module-xesc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hw module xesc design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which xtech chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979