4 open source boards using the 2.54mm 1x6 socket
Real designs built with the 2.54mm 1x6 socket, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hw openmower yardforce
xtech
180 × 170 mm275 parts4LCC-BY-4.012Hw openmower sabo
xtech
254 × 115 mm322 parts6LCC-BY-NC-4.05Hw module xesc
xtech
35 × 100.5 mm47 parts4LCC-BY-4.00AVR/Arduino
Hw module gps
xtech
93.3 × 58 mm14 parts4LCC-BY-4.00
The 2.54mm 1x6 socket in open source designs
The gallery holds 4 open source boards using the 2.54mm 1x6 socket from 4 GitHub repositories; a typical one measures about 136.6 × 107.8 mm and carries around 161 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Hw openmower yardforce by xtech.
Parts used alongside the 2.54mm 1x6 socket
Microcontrollers on boards using the 2.54mm 1x6 socket
What boards using the 2.54mm 1x6 socket are built for
2.54mm 1x6 socket: common questions
Where can I find a 2.54mm 1x6 socket reference design?
Each of the 4 boards on this page is a real design using the 2.54mm 1x6 socket. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 2.54mm 1x6 socket?
The 2.54mm 1x5 socket, 2.54mm 1x9 socket, 2.54mm 2x2 socket, xESC2 and 2.54mm 1x10 socket appear in the most repositories here.
Which microcontrollers do boards using the 2.54mm 1x6 socket use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 2.54mm 1x6 socket?
The median is 136.6 × 107.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the 2.54mm 1x6 socket?
By GitHub stars, Hw openmower yardforce by xtech, with 12 stars.
Can I simulate one of these boards using the 2.54mm 1x6 socket before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.