Hexboard

Xtimate·hexboard

Hexboard PCB layout, top view — open source RP2040/RP2350 board by Xtimate

About the Hexboard PCB

Hexboard is an open source RP2040/RP2350 PCB design by Xtimate, published on GitHub. It is a 2-layer board measuring 91.3 × 105.4 mm, with 44 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT, W25Q16JVSS and TMP102xxDRL. By type, the board carries 15 capacitors, 13 resistors, 5 connectors, 4 ICs, 3 switches and 3 diodes.

Main components on the Hexboard

Hexboard bill of materials (BOM)

44 components, 22 distinct parts.

QtyPartRefs
1
RP2040
U1
1
MCP1700x-330xxTT
U2
1
W25Q16JVSS
U3
1
TMP102xxDRL
U4
1
Crystal_GND23_Small
Y1
1
USB_C_Receptacle_USB2.0_16P
J1
1
USB_A
J2
2
Conn_01x20
J3, J4
1
Conn_01x04
J5
3
SW_Push
SW1, SW2, SW3
2
LED
D1, D2
1
WS2812B
D3
9
0.1uF
C1, C6, C7, C10, C11, C12, C13, C15 +1
2
10uF
C2, C3
2
33pF
C4, C5
2
1uF
C8, C14
2
5.1K
R1, R2
2
1K
R3, R5
3
10K
R4, R6, R12
2
100 ohm
R7, R13
Show 2 more
QtyPartRefs
2
27 ohm
R8, R9
2
4.7K
R10, R11

Hexboard design files

The KiCad project lives in the Xtimate/hexboard repository on GitHub; these links point at the commit this page was built from.

Hexboard: common questions

What microcontroller does the Hexboard use?

The Hexboard is built around the RP2040, from the RP2040/RP2350 family.

How big is the Hexboard PCB?

The Hexboard measures 91.3 × 105.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hexboard?

44 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hexboard design files?

From the Xtimate/hexboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hexboard design in my own project?

The repository has no license, so all rights stay with Xtimate. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hexboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards