16 open source boards using the MK20DX256VLH7
Real designs built with the MK20DX256VLH7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416NXP
Kbox hardware
sarfata
100 × 54 mm102 parts2LNo license19NXP
Vindor
ftrias
264 × 34 mm90 parts2LCustom license19NXP
MicroMod 3.2
luni64
22 × 22 mm16 parts2LMIT17NXP
RMTS-Hardware
reilleya
78.1 × 50.2 mm82 parts2LNo license14NXP
Hex2811-penta
brainsmoke
20 × 42.9 mm39 parts2LMIT5NXP
WhiteFox
Xyrec
304.8 × 95.3 mm289 partsNo license0NXP
K20dx256vlh7-dev board
njl7502l
35.8 × 28.2 mm39 parts2LNo license0NXP
K-Type
kiibohd
357.5 × 131.8 mm361 partsCERN-OHL-1.2416NXP
TouchDrum
JoelEB
100 × 100 mm140 parts4LNo license0NXP
WhiteFox
kiibohd
304.8 × 101.1 mm296 partsCERN-OHL-1.2416NXP
IC60
kiibohd
285 × 95 mm242 partsCERN-OHL-1.2416NXP
ICED-L
kiibohd
175.4 × 145 mm163 partsCERN-OHL-1.2416NXP
ICED-R
kiibohd
175.4 × 145 mm163 partsCERN-OHL-1.2416NXP
Testcontroller
kiibohd
145.8 × 42.9 mm45 parts2LCERN-OHL-1.2416NXP
CustomTeensy
UofSSpaceTeam
45.7 × 55.9 mm25 parts2LNo license5
How designs wire the MK20DX256VLH7
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the MK20DX256VLH7 connects to, and the resistors, capacitors and other passives placed on it.
- The USB0_DP pin has a series resistor on 8 of 10 designs, most often 33 Ω (then 27 Ω).
- The USB_DM pin has a series resistor on 8 of 10 designs, most often 33 Ω (then 27 Ω).
- The PTA18 pin has a crystal on 8 of 10 designs, most often 16 MHz.
- The PTA19 pin has a crystal on 8 of 10 designs, most often 16 MHz.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 3, 30, 48 | Connected to: 3.3V 90% |
|
| VSSpin 4, 31, 47 | Connected to: GND 80% · a signal 20% | — |
| USB0_DPpin 5 | Connected to: Signal 90% |
|
| USB_DMpin 6 | Connected to: Signal 90% |
|
| VOUT33pin 7 | Connected to: 3.3V 90% |
|
| VREGINpin 8 | Connected to: Not connected 70% · 3.3V 30% | — |
| PGA1_DM/ADC1_DM0/ADC0_DMpin 12 | Connected to: Not connected 60% · a signal 40% | — |
| VREFHpin 14 | Connected to: 3.3V 40% · not connected 20% · a signal 40% |
|
| VREFLpin 15 | Connected to: GND 50% · not connected 20% · a signal 30% |
|
| VSSApin 16 | Connected to: GND 60% · a signal 20% | — |
| VREF_OUT/CMP1_IN5/CMP0_Ipin 17 | Connected to: Signal 70% · not connected 30% |
|
| XTAL32pin 19 | Connected to: Not connected 70% · a signal 30% | — |
| EXTAL32pin 20 | Connected to: Not connected 70% · a signal 30% | — |
| VBATpin 21 | Connected to: 3.3V 60% · not connected 20% · a signal 20% |
|
| PTA18pin 32 | Connected to: Signal 100% |
|
| PTA19pin 33 | Connected to: Signal 100% |
|
44 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include IC60 by kiibohd, Vindor by ftrias, Kbox hardware by sarfata and MicroMod 3.2 by luni64.
The MK20DX256VLH7 in open source designs
The gallery holds 16 open source boards using the MK20DX256VLH7 from 10 GitHub repositories; a typical one measures about 160.6 × 75.4 mm and carries around 121 components.
89% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Kira by kiibohd.
Parts used alongside the MK20DX256VLH7
Microcontrollers on boards using the MK20DX256VLH7
What boards using the MK20DX256VLH7 are built for
MK20DX256VLH7: common questions
Where can I find a MK20DX256VLH7 reference design?
Each of the 16 boards on this page is a real design using the MK20DX256VLH7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MK20DX256VLH7 USB0_DP pin?
The USB0_DP pin has a series resistor on 8 of 10 designs, most often 33 Ω (then 27 Ω). Counted from the KiCad layouts of 10 open source designs using the MK20DX256VLH7.
What resistor goes on the MK20DX256VLH7 USB_DM pin?
The USB_DM pin has a series resistor on 8 of 10 designs, most often 33 Ω (then 27 Ω). Counted from the KiCad layouts of 10 open source designs using the MK20DX256VLH7.
How is the MK20DX256VLH7 PTA18 pin connected?
The PTA18 pin has a crystal on 8 of 10 designs, most often 16 MHz. Counted from the KiCad layouts of 10 open source designs using the MK20DX256VLH7.
Which microcontrollers do boards using the MK20DX256VLH7 use?
Most are built on NXP (15) and Microchip SAM (1).
How big is a typical board using the MK20DX256VLH7?
The median is 160.6 × 75.4 mm, and 89% are two-layer designs.
What is the most popular open source board using the MK20DX256VLH7?
By GitHub stars, Kira by kiibohd, with 416 stars.
Can I simulate one of these boards using the MK20DX256VLH7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.