BatteryPack RevA
yakuptrkn42-create·ai_pcb_design·Integrated_Battery_Pack_RevA/Project/BatteryPack_RevA.kicad_pcb
About the BatteryPack RevA PCB
BatteryPack RevA is an open source PCB design by yakuptrkn42-create, published on GitHub. It is a 2-layer board measuring 74 × 42 mm, with 73 components from 73 distinct parts.
Other key parts include the BQ294502DRVR, BQ28Z610DRZR-R1 and SCF4030-12-02. By type, the board carries 25 resistors, 13 capacitors, 4 transistors, 3 ICs, 3 diodes and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Güncel teslim: videodan gözlem kaydı ve ayrı bir bağlantı önerisi; paylaşılan üç blok görseli KiCad sayfaları olarak da oluşturuldu.
Güncel teslim: videodan gözlem kaydı ve ayrı bir bağlantı önerisi; paylaşılan üç blok görseli KiCad sayfaları olarak da oluşturuldu.
- Tüm KiCad projeleri, PDF, parça/GPIO tabloları ve video kanıtları — ZIP - Bağlantı önerisi P1 — 7 sayfalı PDF - Video inceleme raporu ve yakın görüntüler — PDF - Açılış ve kapsam · Zaman/kesinlik tablosu
Öneri projesini AIESVideoSchematicReviewR1/Proposal/Project/AIESOneriP1.kicadpro ile KiCad 9'da açın. P1 ERC: 0 hata / 0 uyarı; 157 pin–net eşlemesi kontrol edildi.** GPIO/adres/LED sırası mühendislik seçimidir; mevcut yüklü firmware uyumu bilinmiyor…

Main components on the BatteryPack RevA
BatteryPack RevA bill of materials (BOM)
73 components, 73 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ294502DRVR | FP_U1 | U1 |
| 1 | BQ28Z610DRZR-R1 | FP_U2 | U2 |
| 1 | SCF4030-12-02 | FP_U3 | U3 |
| 1 | SI1414DH-T1-GE3 | FP_Q1 | Q1 |
| 1 | CSD16412Q5A | FP_Q2 | Q2 |
| 1 | CSD16412Q5A | FP_Q3 | Q3 |
| 1 | 2N7002K_R1_00001 | FP_Q4 | Q4 |
| 1 | CZX-4B2-2.54-e_FIXED | FP_J1 | J1 |
| 1 | Solder_JMP_1 | FP_J12 | J12 |
| 1 | 2.5A_1206_FUSE_TBD | FP_F1 | F1 |
| 1 | 0.5A_FAST_1206_FUSE_TBD | FP_F2 | F2 |
| 1 | TH/Rec2.7x5.4_R1.8 | FP_PAD1 | PAD1 |
| 1 | SMD/Rec1.5x3.0 | FP_PAD3 | PAD3 |
| 1 | SMD/Rec1.5x3.0 | FP_PAD4 | PAD4 |
| 1 | TH/Rec2.7x5.4_R1.8 | FP_PAD7 | PAD7 |
| 1 | TH/Rec2.7x5.4_R1.8 | FP_PAD8 | PAD8 |
| 1 | PAD | FP_PAD17 | PAD17 |
| 1 | PAD | FP_PAD19 | PAD19 |
| 1 | Pad | FP_Pad2 | Pad2 |
| 1 | Pad | FP_Pad5 | Pad5 |
Show 53 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pad | FP_Pad6 | Pad6 |
| 1 | Pad | FP_Pad9 | Pad9 |
| 1 | Pad | FP_Pad10 | Pad10 |
| 1 | Pad | FP_Pad11 | Pad11 |
| 1 | Pad | FP_Pad12 | Pad12 |
| 1 | Pad | FP_Pad13 | Pad13 |
| 1 | 10k_NTC_BEAD_BETA_TBD | FP_TH1 | TH1 |
| 1 | 10k_NTC_BEAD_BETA_TBD | FP_TH2 | TH2 |
| 1 | AWG10 | FP_WIRE1 | WIRE1 |
| 1 | AWG10 | FP_WIRE2 | WIRE2 |
| 1 | AWG10 | FP_WIRE3 | WIRE3 |
| 1 | AWG10 | FP_WIRE6 | WIRE6 |
| 1 | BAS16-7-F | FP_D1 | D1 |
| 1 | MM3Z5V6C | FP_D2 | D2 |
| 1 | MM3Z5V6C | FP_D3 | D3 |
| 1 | 100nF/50V | FP_C1 | C1 |
| 1 | 100nF/16V | FP_C2 | C2 |
| 1 | 2.2µF/16V | FP_C4 | C4 |
| 1 | 100nF/16V | FP_C5 | C5 |
| 1 | 100nF/16V | FP_C6 | C6 |
| 1 | 100nF/50V | FP_C7 | C7 |
| 1 | 100nF/16V | FP_C11 | C11 |
| 1 | 100nF/16V | FP_C12 | C12 |
| 1 | 100nF/16V | FP_C13 | C13 |
| 1 | 100nF/16V | FP_C14 | C14 |
| 1 | 1µF/16V | FP_C16 | C16 |
| 1 | 100nF/16V | FP_C17 | C17 |
| 1 | 100nF/16V | FP_C20 | C20 |
| 1 | 100R | FP_R1 | R1 |
| 1 | 100R | FP_R2 | R2 |
| 1 | 5.1k | FP_R3 | R3 |
| 1 | 10M | FP_R4 | R4 |
| 1 | 1mR | FP_R5 | R5 |
| 1 | 5.1k | FP_R6 | R6 |
| 1 | 10R | FP_R7 | R7 |
| 1 | 5.1k | FP_R8 | R8 |
| 1 | 100R | FP_R11 | R11 |
| 1 | 100R | FP_R12 | R12 |
| 1 | 10M | FP_R13 | R13 |
| 1 | 100k | FP_R14 | R14 |
| 1 | 5.1k | FP_R15 | R15 |
| 1 | 1k | FP_R20 | R20 |
| 1 | 100R | FP_R21 | R21 |
| 1 | 100R | FP_R22 | R22 |
| 1 | 1k | FP_R24 | R24 |
| 1 | 100R | FP_R26 | R26 |
| 1 | 4.99R | FP_R27 | R27 |
| 1 | 1k | FP_R28 | R28 |
| 1 | 100R | FP_R29 | R29 |
| 1 | 1k | FP_R30 | R30 |
| 1 | 100k | FP_R32 | R32 |
| 1 | 0.1R_1%_1206 | FP_R40 | R40 |
| 1 | Net-Tie | FP_R46 | R46 |
BatteryPack RevA design files
The KiCad project lives in the yakuptrkn42-create/ai_pcb_design repository on GitHub; these links point at the commit this page was built from.
BatteryPack RevA: common questions
How big is the BatteryPack RevA PCB?
The BatteryPack RevA measures 74 × 42 mm, has 2 copper layers and is 1 mm thick.
How many components are on the BatteryPack RevA?
73 components, from 73 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BatteryPack RevA design files?
From the yakuptrkn42-create/ai_pcb_design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BatteryPack RevA design in my own project?
The repository has no license, so all rights stay with yakuptrkn42-create. Use it as a reference, and ask the author before reusing the design.
More boards in ai_pcb_design
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k