Sanjeevni
YantrikMinds·Sanjeevni·hardware_pcb/sanjeevni_nano_rover_board.kicad_pcb
About the Sanjeevni PCB
Sanjeevni is an open source ESP32 PCB design by YantrikMinds, published on GitHub under the MIT license. It is a 2-layer board measuring 48 × 46 mm, with 1 components from 1 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
It belongs with the robotics & motion, iot & wireless and sensors designs in this gallery.
From the project
Sanjeevni is an end-to-end tactical Urban Search and Rescue (USAR) robotics platform designed to penetrate pancake and cantilever collapse voids where humans, search dogs, and full-sized rovers cannot enter.
Sanjeevni is an end-to-end tactical Urban Search and Rescue (USAR) robotics platform designed to penetrate pancake and cantilever collapse voids where humans, search dogs, and full-sized rovers cannot enter.
The platform combines: 1. Sub-5cm Rubble Scout Nano-Rover Hardware: An ultra-compact $46\text{ mm} \times 48\text{ mm} \times 22\text{ mm}$ invertible dual-drive robot carrier powered by an ESP32-S3 with dual-port streaming. 2. Tactical War Room Command Dashboard: Live multi-phone and hardware rover video feeds, real-time WASD tele-operation cockpit, environmental telemetry, and survivor…
Main components on the Sanjeevni
Sanjeevni bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R8 | U1 |
Sanjeevni design files
The KiCad project lives in the YantrikMinds/Sanjeevni repository on GitHub; these links point at the commit this page was built from.
Sanjeevni: common questions
What microcontroller does the Sanjeevni use?
The Sanjeevni is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the Sanjeevni PCB?
The Sanjeevni measures 48 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sanjeevni?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sanjeevni design files?
From the YantrikMinds/Sanjeevni repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Sanjeevni design in my own project?
Yes, under the terms of its MIT license, which YantrikMinds chose for the repository.
Can I test firmware for the Sanjeevni without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k