Eruca sync smart greenhouse
Yaseen301·eruca-sync-smart-greenhouse·PCB/Cap S2.kicad_pcb
About the Eruca sync smart greenhouse PCB
Eruca sync smart greenhouse is an open source ESP32 PCB design by Yaseen301, published on GitHub under the MIT license. It is a 2-layer board measuring 380.3 × 103.8 mm, with 15 components from 14 distinct parts.
Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the Temp&Humidity, Fan1, Soil_Moisture_sensor, TFT_ILI9341_arduino_Sheid and Pump. By type, the board carries 9 ICs, 3 connectors, 2 modules and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
Eruca Sync: ESP32-S3 greenhouse for Siwa Oasis with closed-loop temperature, moisture, and light control; research portfolio, poster, design previews, and test results.
An automated greenhouse prototype that uses environmental sensing and feedback control to protect crops from changing growing conditions.
STEM capstone | Team 10206 | 2025-2026 Second semester
Reducing the effects of climate change on agriculture and improving the use of arid areas.
An ESP32-S3 monitors temperature, soil moisture, and light intensity and controls actuators to maintain suitable growing conditions.

Main components on the Eruca sync smart greenhouse
Eruca sync smart greenhouse bill of materials (BOM)
15 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Temp&Humidity | PinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | Fan1 | MOSFET_KIT | U2 |
| 1 | Soil_Moisture_sensor | PinHeader_1x03_P2.54mm_Vertical | U3 |
| 1 | TFT_ILI9341_arduino_Sheid | TFT_SCREEN | U4 |
| 1 | ESP32-S3 | ESP32-S3-DEVKITC-1 | U5 |
| 1 | Pump | MOSFET_KIT | U6 |
| 1 | Light_Sensor | PinHeader_1x04_P2.54mm_Vertical | U7 |
| 1 | Fan2 | MOSFET_KIT | U8 |
| 1 | Platier | MOSFET_KIT | U9 |
| 2 | Motor_Servo | PinHeader_1x03_P2.54mm_Vertical | M1, M2 |
| 1 | 5v&GND | Altech_AK100_1x02_P5.00mm | J1 |
| 1 | 12v&GND | Altech_AK100_1x02_P5.00mm | J2 |
| 1 | USB_Debuging (remove to use) | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | WS2812 | PinHeader_1x03_P2.54mm_Vertical | D1 |
Eruca sync smart greenhouse design files
The KiCad project lives in the Yaseen301/eruca-sync-smart-greenhouse repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Cap S2.kicad_pcb
- SchematicPCB/Cap S2.kicad_sch
Eruca sync smart greenhouse: common questions
What microcontroller does the Eruca sync smart greenhouse use?
The Eruca sync smart greenhouse is built around the ESP32-S3, from the ESP32 family.
How big is the Eruca sync smart greenhouse PCB?
The Eruca sync smart greenhouse measures 380.3 × 103.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eruca sync smart greenhouse?
15 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Eruca sync smart greenhouse design files?
From the Yaseen301/eruca-sync-smart-greenhouse repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Eruca sync smart greenhouse design in my own project?
Yes, under the terms of its MIT license, which Yaseen301 chose for the repository.
Can I test firmware for the Eruca sync smart greenhouse without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k