Serial-Converter

Yashomati07·Serial-Converter

Serial-Converter PCB layout, top view — open source board by Yashomati07

About the Serial-Converter PCB

Serial-Converter is an open source PCB design by Yashomati07, published on GitHub. It is a 2-layer board measuring 65 × 57 mm, with 16 components from 9 distinct parts.

Other key parts include the CH340G and MAX3232. By type, the board carries 10 capacitors, 2 ICs, 1 crystal, 1 connector, 1 diode and 1 resistor.

It belongs with the usb & debug tools designs in this gallery.

From the project

This project is a custom Serial Converter PCB designed using KiCad 9, intended to bridge TTL and RS232 (or USB, depending on the configuration) serial communication. It’s ideal for use in embedded systems, microcontroller projects, and hardware debugging.

This repository contains the design files for a Serial Converter PCB created using KiCad 9. The board provides a simple and effective solution for converting serial communication levels—ideal for embedded systems, microcontroller interfacing, or general-purpose serial communication debugging.

- Designed in KiCad 9 - Converts TTL ↔ RS232 (or USB, based on configuration) - Compact and modular PCB layout - Includes schematics, PCB layout, and ready-to-manufacture Gerber files - Open-source hardware for learning and development

Main components on the Serial-Converter

Serial-Converter bill of materials (BOM)

16 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH340G
U1
1
MAX3232
U2
1
12MHZ
12MHz
Y1
1
USB_B
J1
1
RED
D1
7
100NF
100nF
C1, C2, C6, C7, C8, C9, C10
1
10NF
10nF
C3
2
22PF
22pF
C4, C5
1
1k
R1

Serial-Converter design files

The KiCad project lives in the Yashomati07/Serial-Converter repository on GitHub; these links point at the commit this page was built from.

Serial-Converter: common questions

How big is the Serial-Converter PCB?

The Serial-Converter measures 65 × 57 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Serial-Converter?

16 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Serial-Converter design files?

From the Yashomati07/Serial-Converter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Serial-Converter design in my own project?

The repository has no license, so all rights stay with Yashomati07. Use it as a reference, and ask the author before reusing the design.

Similar boards