Cansat-Tzunun
yeffrimic·Cansat-Tzunun·kicad/cansat.kicad_pcb
About the Cansat-Tzunun PCB
Cansat-Tzunun is an open source PCB design by yeffrimic, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 27 components from 25 distinct parts.
Other key parts include the SIM800L-CORE. By type, the board carries 10 connectors, 8 ICs, 7 resistors, 1 switch and 1 capacitor.
It belongs with the sensors and rf & radio designs in this gallery.
From the project
Cansat and air quality station
Este repositorio contiene el código, documentación, archivos de diseño y recursos educativos para implementar una estación de monitoreo ambiental, así como su versión miniaturizada adaptada al formato CanSat. El proyecto fue desarrollado por estudiantes de la Universidad Mesoamericana, sede Quetzaltenango, como una herramienta de medición ambiental portátil, educativa y de bajo costo.
Main components on the Cansat-Tzunun
Cansat-Tzunun bill of materials (BOM)
27 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | MODULE_WIFI_KIT_32__V3_ | U1 |
| 1 | ~ | micro sd | U2 |
| 1 | ~ | neo6 gps module | U3 |
| 1 | SIM800L-CORE | SIM800L-CORE | U4 |
| 2 | ~ | module_bmp180 | U5, U8 |
| 1 | ~ | module_mpu6050 | U6 |
| 1 | ~ | PinHeader_1x06_P2.54mm_Vertical | U7 |
| 1 | 5V | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 3.7V | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | EXTRA-I2C-3 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | EXTRA-I2C-4 | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | ADC-EXTRA-1 | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | ADC-EXTRA-2 | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | ADC-EXTRA-3 | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | DIO-EXTRA-3 | PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | DIO-EXTRA-2 | PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | DIO-EXTRA-1 | PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | 220uf | CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | LDR07 | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 2 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 1 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 6.8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
Cansat-Tzunun design files
The KiCad project lives in the yeffrimic/Cansat-Tzunun repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/cansat.kicad_pcb
- Schematickicad/cansat.kicad_sch
Cansat-Tzunun: common questions
How big is the Cansat-Tzunun PCB?
The Cansat-Tzunun measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cansat-Tzunun?
27 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cansat-Tzunun design files?
From the yeffrimic/Cansat-Tzunun repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cansat-Tzunun design in my own project?
The repository has no license, so all rights stay with yeffrimic. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956