Lightsaber ornament
Yoda-Flash·lightsaber-ornament
About the Lightsaber ornament PCB
Lightsaber ornament is an open source ESP32 PCB design by Yoda-Flash, published on GitHub. It is a 2-layer board measuring 36 × 166.5 mm, with 22 components from 11 distinct parts.
Its main chip is the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family. Other key parts include the MCP73831-2-OT. By type, the board carries 8 LEDs, 4 battery holders, 2 ICs, 2 connectors, 2 resistors and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
A lightsaber ornament made for Hack Club's Hacky Holidays!
At first, I wanted to make a Yoda ornament PCB, but I realized that it would only look good with green colored lights. Upon further thought, I realized that Lightsabers would look good in nearly any color, which made it perfect as an ornament. Hence, I decided to make this lightsaber ornament PCB, to bring joy to all Star Wars lovers during the holidays!
A simulation of it can be found here: https://wokwi.com/projects/421435412428006401
Main components on the Lightsaber ornament
Lightsaber ornament bill of materials (BOM)
22 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U3 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | MOUDLE14P-SMD-2.54-21X17.8MM | U4 |
| 2 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J1, J2 |
| 4 | Battery_Cell | Battery_Panasonic_CR2032-HFN_Horizontal_CircularHoles | BT1, BT2, BT3, BT4 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm | SW1 |
| 1 | TestPoint | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 8 | WS2813C-V3 | LED-SMD_6P-L5.4-W5.0-BR_WS2813C-V3 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 1 | LED | LED_D3.0mm_Clear | D1 |
| 1 | 10uF | CAP_FA23_TDK | C4 |
| 1 | 33k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Lightsaber ornament design files
The KiCad project lives in the Yoda-Flash/lightsaber-ornament repository on GitHub; these links point at the commit this page was built from.
- Layoutlightsaber.kicad_pcb
- Schematiclightsaber.kicad_sch
Lightsaber ornament: common questions
What microcontroller does the Lightsaber ornament use?
The Lightsaber ornament is built around the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family.
How big is the Lightsaber ornament PCB?
The Lightsaber ornament measures 36 × 166.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lightsaber ornament?
22 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lightsaber ornament design files?
From the Yoda-Flash/lightsaber-ornament repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lightsaber ornament design in my own project?
The repository has no license, so all rights stay with Yoda-Flash. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lightsaber ornament without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k