Robot trace V1
Yodahl·Robot_trace_V1
About the Robot trace V1 PCB
Robot trace V1 is an open source Renesas PCB design by Yodahl, published on GitHub. It is a 4-layer board measuring 65 × 45 mm, with 143 components from 47 distinct parts.
Its main chip is the R5F5651EHDFP#30, from the Renesas family. Other key parts include the A4955GESTR-T, CSD87350Q5D, SN74LVC2G17DCKT, LSM6DSRXTR and CH340K. By type, the board carries 59 resistors, 38 capacitors, 15 ICs, 12 diodes, 10 connectors and 6 switches.
It belongs with the robotics & motion designs in this gallery.
Main components on the Robot trace V1
Robot trace V1 bill of materials (BOM)
143 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R5F5651EHDFP#30 | QFP50P1600X1600X170-100N | IC1 |
| 2 | A4955GESTR-T | A4955GESTRT | IC2, IC3 |
| 4 | CSD87350Q5D | DQY0008A | U1, U2, U3, U4 |
| 2 | SN74LVC2G17DCKT | SOT65P210X110-6N | U5, U6 |
| 1 | LSM6DSRXTR | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U7 |
| 1 | CH340K | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U8 |
| 2 | TLVM23625RDNR | RDN0011A-MFG | U9, U10 |
| 1 | LP38690SD-3.3/NOPB | SDE06A | U11 |
| 1 | SQJ409EP-T1_GE3 | DPAK5_P-T1_GE3_VIS | U12 |
| 1 | IRLML6344TRPBF | SOT-23 | Q1 |
| 1 | Motor_R | CONN_B02B-PASKLFSN_JST | J1 |
| 1 | Motor_L | CONN_B02B-PASKLFSN_JST | J2 |
| 1 | CONN_01X18 Conn_01x18 | OMRON_XF2M-1815-1A | J3 |
| 2 | CONN_01X03 Conn_01x03 | CONN_BM03B-SRSS-TBLFSN_JST | J4, J5 |
| 2 | FTSH-105-01-L-D-K | SAMTEC_FTSH-105-01-L-D-K | J6, J7 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Palconn_UTC16-G | J8 |
| 1 | MEM2085-00-115-00-A_REV0.2 | GCT_MEM2085-00-115-00-A_REV0.2 | J9 |
| 1 | Motor_FUN | CONN_B02B-PASKLFSN_JST | J10 |
| 1 | Battery | AMASS_XT30U-F_1x02_P5.0mm_Vertical | BT1 |
| 1 | SMDJ18A | SMDJSeries_LTF | CR1 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FR01FR16P-S | FR01FR16PS | S1 |
| 1 | JS202011SCQN | SW_JS202011SCQN | S2 |
| 1 | SW_DPST_X2 SW_DPST_x2 | SW_RS-032G05A3-SMRT | SW2 |
| 2 | SW_Push | SW_RS-032G05A3-SMRT | SW3, SW4 |
| 1 | 400UDP1L1BLKM2RE | 400UDP1L1BLKM2RE_EWI | SW5 |
| 11 | LED | LED_0603_1608Metric | D2, D3, D4, D5, D6, D7, D8, D9 +3 |
| 1 | SS2040FL | D_SOD-123F | D15 |
| 22 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C8, C9 +14 |
| 1 | 0.22UF 0.22uF | C_0603_1608Metric | C3 |
| 2 | 1000PF 1000pF | C_0603_1608Metric | C12, C13 |
| 1 | 47UF 47uF | CP_EIA-3216-10_Kemet-I_HandSolder | C26 |
| 2 | 1UF 1uF | C_0603_1608Metric | C27, C32 |
| 3 | 10UF 10uF | C_0603_1608Metric | C28, C31, C36 |
| 5 | 22UF 22uF | C_0603_1608Metric | C29, C30, C33, C34, C35 |
| 1 | 0.1U 0.1u | C_0603_1608Metric | C37 |
| 1 | 100UF 100uF | CAPMP7.6X6_2N_KEM | C38 |
| 7 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R5, R27, R28, R49, R52, R58 |
| 5 | 47K 47k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R4, R6, R57 |
| 18 | 6.2K 6.2k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R8, R9, R10, R11, R12, R13, R14 +10 |
| 2 | 5.1K 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26 |
| 5 | 1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R29, R30, R50, R53, R54 |
| 9 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R32, R33, R42, R43, R44, R45, R46 +1 |
| 8 | 330 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R34, R35, R36, R37, R38, R39, R40, R41 |
| 2 | 40.2K 40.2k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R48, R51 |
| 1 | 12K 12k | R_0603_1608Metric | R55 |
| 1 | 100 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R56 |
| 1 | 3.3K 3.3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R59 |
Robot trace V1 design files
The KiCad project lives in the Yodahl/Robot_trace_V1 repository on GitHub; these links point at the commit this page was built from.
- LayoutRobot_trace_V1.kicad_pcb
- SchematicRobot_trace_V1.kicad_sch
- BOMproduction/bom.csv
Robot trace V1: common questions
What microcontroller does the Robot trace V1 use?
The Robot trace V1 is built around the R5F5651EHDFP#30, from the Renesas family.
How big is the Robot trace V1 PCB?
The Robot trace V1 measures 65 × 45 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Robot trace V1?
143 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Robot trace V1 design files?
From the Yodahl/Robot_trace_V1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Robot trace V1 design in my own project?
The repository has no license, so all rights stay with Yodahl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Robot trace V1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Renesas firmware against it before you order a PCB.
Similar boards
Renesas
Bing bong pcb audio
GlobalSequence
40.3 × 108 mm55 parts2LNo license11Renesas
A13board
slapin
50 × 90.4 mm153 parts4LGPL-3.06Renesas
DRC-SLVD2025
hosh0344
60 × 45 mm58 parts2LNo license2Renesas
Power-Eater
yu65536
132.8 × 93 mm128 parts2LCustom license2Renesas
TouchSensor
tamapochi1
111 × 275 mm51 parts2LNo license2Renesas
DRC-SVMD2025 Ver2.1
hosh0344
60 × 45 mm54 parts2LNo license2