2 open source boards using the SQJ409EP-T1_GE3

Real designs built with the SQJ409EP-T1_GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SQJ409EP-T1_GE3 in open source designs

The gallery holds 2 open source boards using the SQJ409EP-T1_GE3 from 2 GitHub repositories; a typical one measures about 82 × 72 mm and carries around 127 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is 2nd mainboard pcb by Fiberprinter.

Microcontrollers on boards using the SQJ409EP-T1_GE3

What boards using the SQJ409EP-T1_GE3 are built for

SQJ409EP-T1_GE3: common questions

Where can I find a SQJ409EP-T1_GE3 reference design?

Each of the 2 boards on this page is a real design using the SQJ409EP-T1_GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SQJ409EP-T1_GE3 use?

Most are built on AVR/Arduino (1) and Renesas (1).

How big is a typical board using the SQJ409EP-T1_GE3?

The median is 82 × 72 mm, and 50% are two-layer designs.

What is the most popular open source board using the SQJ409EP-T1_GE3?

By GitHub stars, 2nd mainboard pcb by Fiberprinter, with 4 stars.

Can I simulate one of these boards using the SQJ409EP-T1_GE3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part