SunSensor

YogPanjarale·SunSensor

SunSensor PCB layout, top view — open source AVR/Arduino board by YogPanjarale

About the SunSensor PCB

SunSensor is an open source AVR/Arduino PCB design by YogPanjarale, published on GitHub. It is a 2-layer board measuring 30 × 74 mm, with 57 components from 8 distinct parts.

Its main chip is the ATtiny85-20P, from the AVR/Arduino family. Other key parts include the ADS1115IDGS. By type, the board carries 17 diodes, 17 resistors, 16 inductors, 5 ICs and 2 connectors.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Low cost Sun Sensor Prototype

This is a low cost prototype for sun sensor using ldrs, 4x 16bit adc and attiny85 microcontroller, with a led matrix display for visualization. The pcb has been designed in KiCad. and as a module with i2c breakout, so that it can be used with other microcontrollers as well.

- common generic LDRs (Light Dependent Resistors) - 4x 16-bit ADC ADS1115 (Analog to Digital Converter) - ATTINY85 Microcontroller - 8x8 LED Matrix of WS2812B LEDs

SunSensor, from the project README
From the project README

Main components on the SunSensor

SunSensor bill of materials (BOM)

57 components, 8 distinct parts.

QtyPartRefs
4
ADS1115IDGS
U1, U2, U3, U4
1
ATtiny85-20P
U5
1
Conn_01x05_Socket
J1
1
Conn_01x04_Pin
J2
16
WS2812B
D1, D2, D3, D4, D5, D6, D7, D8 +8
1
LED
D17
16
LDR07
L1, L2, L3, L4, L5, L6, L7, L8 +8
17
R
R1, R2, R3, R4, R5, R6, R7, R8 +9

SunSensor design files

The KiCad project lives in the YogPanjarale/SunSensor repository on GitHub; these links point at the commit this page was built from.

SunSensor: common questions

What microcontroller does the SunSensor use?

The SunSensor is built around the ATtiny85-20P, from the AVR/Arduino family.

How big is the SunSensor PCB?

The SunSensor measures 30 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SunSensor?

57 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the SunSensor design files?

From the YogPanjarale/SunSensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SunSensor design in my own project?

The repository has no license, so all rights stay with YogPanjarale. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SunSensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards