Phoenix hw
yorkaerospace·Phoenix-hw
About the Phoenix hw PCB
Phoenix hw is an open source RP2040/RP2350 PCB design by yorkaerospace, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 86.4 × 40.6 mm, with 90 components from 56 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AMS1117-3.3, I3G4250D, MS5637-02BA03, ADXL343 and Si4468/7. By type, the board carries 26 capacitors, 18 resistors, 9 ICs, 8 diodes, 6 transistors and 4 connectors.
It belongs with the sensors and rf & radio designs in this gallery.
From the project
RP2040 based flight computer
This is the hardware repo for our new RP2040-based flight computer. We aim to use this to provide GPS tracking and parachute deployment on our next generation of rockets.
Main components on the Phoenix hw
Phoenix hw bill of materials (BOM)
90 components, 56 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | RP2040-QFN-56_HS | U1 |
| 2 | ~ | SOIC-8_5.23x5.23mm_P1.27mm | U2, U7 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | I3G4250D | I3G4250D | U4 |
| 1 | MS5637-02BA03 | MS5637_1 | U5 |
| 1 | ADXL343 | LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U6 |
| 1 | Si4468/7 | SI4468-A2A-IMR | U8 |
| 1 | L70B-M39 | L70R | U9 |
| 1 | 2N7000 | SOT-23 | Q1 |
| 1 | BSS84 | SOT-23 | Q2 |
| 4 | IRFML8244TRPBF | SOT-23 | Q3, Q4, Q5, Q6 |
| 1 | 12MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 26MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y2 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Battery Connector | ScrewTerm_2.54x04 | J3 |
| 1 | Pyro Connectors | ScrewTerm_2.54x10 | J4 |
| 1 | USB_B_Micro | USB-micro-b-molex-0476420001 | J5 |
| 1 | Antenna | SMA_Molex_73251-2200_Horizontal | AE1 |
| 1 | Antenna | IPEX_MHF_1 | AE2 |
| 1 | 6.8n | C_0603_1608Metric | CM1 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 3.3p | C_0603_1608Metric | CM2, CM3 |
| 1 | 3p | C_0603_1608Metric | CR1 |
| 1 | 1.2p | C_0603_1608Metric | CR2 |
| 1 | 2A Poly | Fuse_0603_1608Metric | F1 |
| 1 | BOOTSEL | SW_SPST_B3U-1000P | JP1 |
| 1 | 120n | L_0603_1608Metric | LC1 |
| 2 | 12n | L_0603_1608Metric | LM1, LM3 |
| 2 | 24n | L_0603_1608Metric | LM2, LR2 |
| 1 | 18n | L_0603_1608Metric | LR1 |
| 6 | 1N4007 | D_SOD-123 | D1, D2, D5, D6, D7, D8 |
| 1 | RED | LED_0603_1608Metric | D3 |
| 1 | GREEN | LED_0603_1608Metric | D4 |
| 1 | 3.3n | L_0603_1608Metric | L1 |
| 1 | 47n | L_0603_1608Metric | L2 |
| 9 | 100n | C_0603_1608Metric | C1, C6, C7, C8, C9, C10, C11, C20 +1 |
| 2 | 1u | C_0603_1608Metric | C2, C3 |
| 2 | 4p | C_0603_1608Metric | C4, C5 |
| 2 | 10u | C_0603_1608Metric | C12, C13 |
| 1 | 470n | C_0603_1608Metric | C14 |
| 1 | 10n | C_0603_1608Metric | C15 |
| 1 | 10uF | C_0603_1608Metric | C16 |
| 2 | 100nF | C_0603_1608Metric | C17, C18 |
| 1 | 470nF | C_0603_1608Metric | C19 |
| 1 | 5.1p | C_0603_1608Metric | C22 |
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 2 | DNF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25, C26 |
| 4 | 10k | R_0603_1608Metric | R1, R2, R10, R11 |
| 2 | 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 1k | R_0603_1608Metric | R5, R6 |
| 1 | 33k | R_0603_1608Metric | R7 |
| 1 | 12k | R_0603_1608Metric | R8 |
| 2 | 470 | R_0603_1608Metric | R9, R14 |
| 1 | 0R | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R12 |
| 1 | 10 | R_0603_1608Metric | R13 |
| 4 | 22k | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4 |
Phoenix hw design files
The KiCad project lives in the yorkaerospace/Phoenix-hw repository on GitHub; these links point at the commit this page was built from.
- LayoutPhoenix.kicad_pcb
- SchematicPhoenix.kicad_sch
Phoenix hw: common questions
What microcontroller does the Phoenix hw use?
The Phoenix hw is built around the RP2040, from the RP2040/RP2350 family.
How big is the Phoenix hw PCB?
The Phoenix hw measures 86.4 × 40.6 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Phoenix hw?
90 components, from 56 distinct parts. The full bill of materials is listed on this page.
Where can I download the Phoenix hw design files?
From the yorkaerospace/Phoenix-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Phoenix hw design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which yorkaerospace chose for the repository.
Can I test firmware for the Phoenix hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k