1551-rePico
ytmytm·1551-rePico·experimental/hardware1551/1551-rePico.kicad_pcb
About the 1551-rePico PCB
1551-rePico is an open source PCB design by ytmytm, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 64.1 × 99.4 mm, with 23 components from 4 distinct parts.
Other key parts include the XC9572XL-VQ64. By type, the board carries 14 resistors, 4 transistors, 4 capacitors and 1 IC.
It belongs with the retro computing designs in this gallery.
From the project
Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.
Archival only. Do not treat this tree as the supported product. It is kept for curious readers and for archaeology of the bring-up path that led to the current 1551-III-Pico board.
1551 mainboard remains with the experimental daughterboard plugged into CPU/TPI sockets.
Passthrough CPU socket is empty, the socket for Pico 2 is also not populated anymore.
Gate array was damaged and was replaced by 74'139 to split address space between RAM, TPI and ROM.

Main components on the 1551-rePico
1551-rePico bill of materials (BOM)
23 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC9572XL-VQ64 | TQFP-64_10x10mm_P0.5mm | U3 |
| 4 | BSS138 | SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5 |
| 14 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +6 |
1551-rePico design files
The KiCad project lives in the ytmytm/1551-rePico repository on GitHub; these links point at the commit this page was built from.
1551-rePico: common questions
How big is the 1551-rePico PCB?
The 1551-rePico measures 64.1 × 99.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1551-rePico?
23 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 1551-rePico design files?
From the ytmytm/1551-rePico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 1551-rePico design in my own project?
Yes, under the terms of its GPL-3.0 license, which ytmytm chose for the repository.
More boards in 1551-rePico
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k