1551-III Pico
ytmytm·1551-rePico·hardware-1551-III-Pico/1551-III-Pico.kicad_pcb
About the 1551-III Pico PCB
1551-III Pico is an open source PCB design by ytmytm, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 57 components from 9 distinct parts.
Other key parts include the XC9572XL-VQ64 and 74LS165. By type, the board carries 40 resistors, 8 capacitors, 6 transistors and 2 ICs.
It belongs with the retro computing designs in this gallery.
From the project
Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.
KiCad project for the horizontal main module of 1551-rePico: Pico2 + 6510T (or MOS CPU Replacer) + XC9572XL CPLD + 32 KB SRAM + 64 KB EPROM. It replaces the Pi1551-III Module-rotated board and mates with the Pi1551-III front panel and faceplates.
Host connection is a ribbon cable to plus4-tcbm2sd (same as Pi1551-III).
- Firmware: ../firmware-1551-III-pico/ - CPLD bitstream: ../hdl-1551-III/Fake6523.jed — flash notes in the top-level README - DOS EPROM images (27C512): ../roms/ — see 1551-RAMBOard for provenance and patch details - Mechanical / panel BOM: Pi1551-III
Main components on the 1551-III Pico
1551-III Pico bill of materials (BOM)
57 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC9572XL-VQ64 | TQFP-64_10x10mm_P0.5mm | U9 |
| 1 | 74LS165 | SOP-16_4.4x10.4mm_P1.27mm | U19 |
| 6 | BSS138 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | C7529389 SD connector | Conn_uSDcard | XS1 |
| 7 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C10 |
| 1 | C1969735 10µ | CP_EIA-3216-12_Kemet-S_HandSolder | C11 |
| 37 | 3.3K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +29 |
| 2 | C17710 470* | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R27 |
| 1 | 2.2R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R37 |
1551-III Pico design files
The KiCad project lives in the ytmytm/1551-rePico repository on GitHub; these links point at the commit this page was built from.
1551-III Pico: common questions
How big is the 1551-III Pico PCB?
The 1551-III Pico measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1551-III Pico?
57 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 1551-III Pico design files?
From the ytmytm/1551-rePico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 1551-III Pico design in my own project?
Yes, under the terms of its GPL-3.0 license, which ytmytm chose for the repository.
More boards in 1551-rePico
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k