C16-multirom

ytmytm·c16-multirom·kicad-c16-multirom/kicad-c16-multirom.kicad_pcb

C16-multirom PCB layout, top view — open source AVR/Arduino board by ytmytm

About the C16-multirom PCB

C16-multirom is an open source AVR/Arduino PCB design by ytmytm, published on GitHub. It is a 2-layer board measuring 55.9 × 42 mm, with 11 components from 7 distinct parts.

Its main chip is the ATtiny85-20P, from the AVR/Arduino family. Other key parts include the 74LS00 and 27C512. By type, the board carries 5 connectors, 4 ICs and 2 resistors.

From the project

C16 board that adds a function ROM and lets you pick one of two kernals and one of two function ROMs (3-plus-1, Parobek).

This project is a multirom board for the Commodore 16 only. It is heavily inspired by the ROM update for Commodore 16 at My Old Computer.

The stock C16 uses two separate chips for BASIC and KERNAL. By putting BASIC and KERNAL in a single 64K chip (U3), we free the second socket for a function ROM (U4) e.g. 3-plus-1 and Parobek, so the C16 gains capabilities similar to the Plus/4. Replacing the original mask ROMs with EEPROMs (e.g. 27E512) also reduces power draw.

C16-multirom, from the project README
From the project README

Main components on the C16-multirom

C16-multirom bill of materials (BOM)

11 components, 7 distinct parts.

QtyPartRefs
1
ATtiny85-20P
U1
1
74LS00
U2
2
27C512
U3, U4
2
Conn_01x02_Pin
J1, J2
1
Conn_01x01_Pin
J3
2
Conn_01x01_Pin
J4, J5
2
10K
R1, R2

C16-multirom design files

The KiCad project lives in the ytmytm/c16-multirom repository on GitHub; these links point at the commit this page was built from.

C16-multirom: common questions

What microcontroller does the C16-multirom use?

The C16-multirom is built around the ATtiny85-20P, from the AVR/Arduino family.

How big is the C16-multirom PCB?

The C16-multirom measures 55.9 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the C16-multirom?

11 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the C16-multirom design files?

From the ytmytm/c16-multirom repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the C16-multirom design in my own project?

The repository has no license, so all rights stay with ytmytm. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the C16-multirom without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards