Cat gpt
yudai0804·cat-gpt·pcb/v1.1/rat_board.kicad_pcb
About the Cat gpt PCB
Cat gpt is an open source ESP32 PCB design by yudai0804, published on GitHub. It is a 2-layer board measuring 70 × 70 mm, with 20 components from 15 distinct parts.
Its main chip is the ESP32, from the ESP32 family. Other key parts include the DRV8835 and NJM2845DL-05. By type, the board carries 6 connectors, 4 resistors, 3 ICs, 2 switches, 2 diodes and 2 capacitors.
From the project
高専4年次の授業で作ったやつ。未完成。
Main components on the Cat gpt
Cat gpt bill of materials (BOM)
20 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ESP32 | U1 |
| 1 | DRV8835 | DRV8835 | U2 |
| 1 | NJM2845DL-05 | NJM2845 | U3 |
| 4 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J3, J5, J7 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | Buzzer | PKM22EPP-40 | BZ1 |
| 1 | SW_SPDT | switch | SW1 |
| 1 | SW_Push | tact_switch | SW2 |
| 1 | LED BLUE | LED_D5.0mm | D1 |
| 1 | LED WHITE | LED_D5.0mm | D2 |
| 1 | 2.2u | C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 0.33u | C_Disc_D7.0mm_W2.5mm_P5.00mm | C2 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
Cat gpt design files
The KiCad project lives in the yudai0804/cat-gpt repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/v1.1/rat_board.kicad_pcb
- Schematicpcb/v1.1/rat_board.kicad_sch
Cat gpt: common questions
What microcontroller does the Cat gpt use?
The Cat gpt is built around the ESP32, from the ESP32 family.
How big is the Cat gpt PCB?
The Cat gpt measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cat gpt?
20 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cat gpt design files?
From the yudai0804/cat-gpt repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cat gpt design in my own project?
The repository has no license, so all rights stay with yudai0804. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Cat gpt without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k